718773
66
Zoom out
Zoom in
Previous page
1/236
Next page
UPPER THREADING
64
o
Pull out about 100-150 mm (approx. 4-6
inches) of the thread, and then pass it under
the presser foot toward the rear of the
machine.
Raise the presser foot lever if the presser foot is
lowered.
a About 100-150 mm (approx. 4-6 inches)
Using the Twin Needle Mode
The twin needle can only be used for stitch
patterns that show after being selected. Before
you select a stitch pattern, make sure the stitch can
be sewn in the twin needle mode (refer to the
“STITCH SETTING CHART” on page 218).
a
Press to lock all keys and buttons and
then install the twin needle (CHANGING
THE NEEDLE” on page 69).
* If the message “OK to automatically lower the
presser foot?” appears on the LCD screen, press
to continue.
Memo
If the needle could not be threaded or the
thread was not passed through the needle
bar thread guides, perform the procedure
again starting from step
c.
Then, pass the thread through the eye of
the needle after step
i.
Note
Some needles cannot be threaded with the
needle threader. In this case, instead of
using the needle threader after passing the
thread through the needle bar thread guide
(marked “6”), manually pass the thread
through the eye of the needle from the front.
CAUTION
Twin needle (part code XE4963-001) is
recommended for this machine. Contact your
authorized Brother dealer for replacement
needles (size 2.0/11 is recommended).
Be sure to set the twin needle mode when
using the twin needle. Using the twin needle
while the machine is in single needle mode
could cause the needle to break, resulting in
damage.
Do not sew with bent needles. The needle
could break and cause injury.
When using the twin needle, it is
recommended to use presser foot “J”.
When the twin needle is used, bunched
stitches may occur depending on the types of
fabric and thread that are used.
Use monogramming foot “N” for decorative
stitches.
Before changing the needle or threading the
machine, be sure to press
on the LCD
Screen to lock all keys and buttons, otherwise
injuries may occur if the “Start/Stop” button
or any other button is pressed and the machine
starts sewing.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is XP1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is XP1 in the language / languages: English as an attachment in your email.

The manual is 8,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is XP1

Brother Innov-is XP1 User Manual - English - 204 pages

Brother Innov-is XP1 User Manual - German - 204 pages

Brother Innov-is XP1 User Manual - German - 236 pages

Brother Innov-is XP1 User Manual - Dutch - 204 pages

Brother Innov-is XP1 User Manual - Dutch - 236 pages

Brother Innov-is XP1 User Manual - French - 204 pages

Brother Innov-is XP1 User Manual - French - 236 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info