718773
196
Zoom out
Zoom in
Previous page
1/204
Next page
ERROR MESSAGES
194
This message is displayed
when the machine failed to
recognize the embroidery
positioning mark.
- Confirm that the
embroidery positioning
mark is in the selected
area. If problem persists,
refer to page 51 to
reposition mark.
- Machine failed to
recognize printed
positioning mark. Set
“Page Scaling” to “None
(100%)”, and try printing
the embroidery
positioning mark again.
(page 99)
This message is displayed
when the machine has
recognized the embroidery
position mark. Remove the
embroidery positioning
sticker and press to
continue. To remove the
embroidery positioning
sticker more easily, press
. (page 51)
This message appears
when the built-in camera is
being used to align the
embroidery position, but
the embroidery positioning
sticker is too near an edge
or the pattern extends from
the embroidery frame.
Change the positioning of
the embroidery position
sticker, and then try
aligning the position again.
Refer to page 46.
This message is displayed
when the upper thread is
broken or not threaded
correctly, and the “Start/
Stop” button or the
“Reverse/ Reinforcement
Stitch” button is pressed.
This message is displayed
when the “Presser Foot
Lifter” button is pushed
while the presser foot lever
is raised/the needle is
lowered.
This message is displayed
when the “Start/ Stop”
button is pushed while the
machine is in embroidery
edit mode and a pattern is
being edited.
This message is displayed
when there is no stitch or
embroidery pattern
selected and the “Start/
Stop” button or the
“Reverse/Reinforcement
Stitch” button is pressed.
This message is displayed
when the bobbin thread is
running out.
This message is displayed
when the memory is full
and the stitch or pattern
cannot be saved.
This message is displayed
when, after selecting a
pattern or is pressed
and the pattern is about to
be deleted.
This message is displayed
when the bobbin is being
wound, and the motor
locks because the thread is
tangled, etc.
This message is displayed
when there is a possibility
that the data for the
selected pattern is
corrupted.
This message is displayed
when the embroidery unit is
attached and the power is
turned on with the needle in
the down position.
This message is displayed
when you try to use
incompatible media.
196


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is XP1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is XP1 in the language / languages: English as an attachment in your email.

The manual is 9,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is XP1

Brother Innov-is XP1 User Manual - English - 236 pages

Brother Innov-is XP1 User Manual - German - 204 pages

Brother Innov-is XP1 User Manual - German - 236 pages

Brother Innov-is XP1 User Manual - Dutch - 204 pages

Brother Innov-is XP1 User Manual - Dutch - 236 pages

Brother Innov-is XP1 User Manual - French - 204 pages

Brother Innov-is XP1 User Manual - French - 236 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info