618146
14
Zoom out
Zoom in
Previous page
1/332
Next page
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
B-12
The names of the various parts of the sewing machine and their functions are described below. Before
using the sewing machine, carefully read these descriptions to learn the names of the machine parts.
Machine
Front View
a Top cover
Open the top cover to thread the machine and wind the
bobbin.
b Pre-tension disk
Pass the thread around the pre-tension disk when winding the
bobbin thread. (page B-40)
c Thread guide for bobbin winding
Pass the thread through this thread guide when winding the
bobbin thread. (page B-40)
d Spool pin
Place a spool of thread on the spool pin. (page B-48)
e Spool cap
Use the spool cap to hold the spool of thread in place.
(page B-48)
f Supplemental spool pin
Use this spool pin to wind the bobbin thread, or to sew with the
twin needle. (page B-40, B-51)
g Bobbin winder
Use the bobbin winder when winding the bobbin. (page B-40)
h LCD (liquid crystal display)
Settings for the selected stitch and error messages appear in
the LCD. (page B-24)
i Speaker
j Knee lifter
Use the knee lifter to raise and lower the presser foot.
(page S-15)
k Knee lifter slot
Insert the knee lifter into the slot. (page S-15)
l Operation buttons (7 buttons) and sewing speed
controller
Use these buttons and the slide to operate the sewing
machine. (page B-14)
m Flat bed attachment with accessory compartment
Store presser feet and bobbins in the accessory compartment
of the flat bed attachment. When sewing cylindrical pieces,
remove the flat bed attachment. (page B-15)
n Thread cutter
Pass the threads through the thread cutter to cut them.
(page B-50)
o Thread guide plate
Pass the thread around the thread guide plate when threading
upper thread. (page B-48)
Right-side/Rear View
a Connector for the presser foot
Connect the dual feed foot or embroidery foot with LED
pointer. (page B-61, B-67)
b Handle
Carry the sewing machine by its handle when transporting the
machine.
c Presser foot lever
Raise and lower the presser foot lever to raise and lower the
presser foot. (page B-55)
d Air vent
The air vent allows the air surrounding the motor to circulate.
Do not cover the air vent while the sewing machine is being
used.
e Main power switch
Use the main power switch to turn the sewing machine ON and
OFF. (page B-21)
f Foot controller
Depress the foot controller to control the speed of the machine.
(page S-4)
g Power cord receptacle
Insert the power cord into the machine receptacle. (page B-21)
h Sensor pen holder connector
Connect the included sensor pen holder. (page B-72)
i Sensor pen jack
Connect the sensor pen. (page B-71)
j Foot controller jack
Insert the foot controller plug into its jack on the machine.
(page S-4)
k USB port for computer
In order to import/export patterns between a computer and the
machine, plug the USB cable into the USB port. (page B-66,
S-97, E-47)
l USB port for mouse / media
In order to send patterns from/to USB media, plug the USB
media directly into the USB port. (page B-66, S-96, E-46)
Connect the USB mouse to operate with mouse. (page B-67)
m Handwheel
Rotate the handwheel toward you (counterclockwise) to raise
and lower the needle. The wheel should be turned toward the
front of the machine.
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is V7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is V7 in the language / languages: English as an attachment in your email.

The manual is 24,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is V7

Brother Innov-is V7 User Manual - German - 332 pages

Brother Innov-is V7 User Manual - Dutch - 332 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info