718770
160
Zoom out
Zoom in
Previous page
1/180
Next page
CREATING BOBBIN WORK
A-10
Start Embroidering
a
Hoop the fabric so the right side of the
fabric is facing down with the stabilizer
lying on the top. Use an embroidery frame
that fits the size of the pattern and then
attach the frame to the machine. These
patterns are embroidered from the wrong
side of the fabric so technically you are
working in “reverse” of normal
embroidering.
a Wrong side of fabric
b
It is necessary to move to the beginning of
stitching so press , and then press .
The embroidery frame moves to the beginning of
stitching.
c
Press .
d
Press .
The screen changes, and all keys and operation
buttons are locked.
e
Using the presser foot lever, raise the
presser foot.
f
To bring the bobbin thread above the
fabric, rotate the handwheel
counterclockwise while holding the upper
thread.
g
As shown below, pull the upper thread to
pull the bobbin thread up through the
fabric.
a Upper thread
b Bobbin thread
h
Press to unlock all keys and
buttons.
i
Lower the presser foot.
j
While holding both the upper thread and
the bobbin thread, sew a section of the
pattern.
CAUTION
Always use a stabilizer material for embroidery.
Otherwise, the needle may break and cause injuries.
Not using a stabilizer material may result in a poor
finish to your project.
Memo
If the bobbin thread cannot be pulled up,
use an awl to create small hole to help pull
bobbin thread to surface.
160


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is V3 LE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is V3 LE in the language / languages: English as an attachment in your email.

The manual is 14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is V3 LE

Brother Innov-is V3 LE User Manual - German - 180 pages

Brother Innov-is V3 LE User Manual - Dutch - 180 pages

Brother Innov-is V3 LE User Manual - French - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info