618038
75
Zoom out
Zoom in
Previous page
1/100
Next page
Making Embroidery Adjustments
Embroidering E-27
EMBROIDERY
E
c
Press .
Adjusting the bobbin case (with no color on
the screw)
The bobbin case (with no color on the screw) can be adjusted
when bobbin tension changes are required to accommodate
different bobbin threads. See “Embroidery Attractive Finishes
in the “Basic operations”.
To adjust the bobbin tension for embroidery function, using
the bobbin case (with no color on the screw), turn the
slotted-head screw (-) with a screwdriver (small).
1 Do not turn the phillips screw (+).
2 Adjust with a screwdriver (small).
Correct tension
Upper thread slightly appears on the wrong side of fabric.
1 Right side
2 Wrong side
Bobbin thread is too loose
Bobbin thread appears slightly on the right side of fabric.
1 Right side
2 Wrong side
If this occurs, turn the slotted-head screw (-) clockwise,
being careful not to over-tighten the screw, approximately
30-45 degrees to increase bobbin tension.
Bobbin thread is too tight
Upper thread on the right side of fabric seems to be
lifting/looping and bobbin thread is not seen on the wrong
side of fabric.
1 Right side
2 Wrong side
If this occurs, turn the slotted-head screw (-)
counterclockwise, being careful not to over-loosen the
screw, approximately 30-45 degrees to decrease bobbin
tension.
Note
With “Embroidery Tension” on the setting
screen, the tension of the upper thread can be
adjusted for embroidering. The selected setting
will be applied to all patterns.
When embroidering, if the overall tension of the
upper thread is too tight or too loose, adjust it
from the setting screen. Press to tighten the
upper thread tension and press to loosen the
upper tension. If an individual embroidery pattern
needs additional fine tuning, refer to “Adjusting
thread tension” on page E-26.
CAUTION
When adjusting the bobbin case, be sure to
remove the bobbin from the bobbin case.
DO NOT adjust the position of the phillips (+)
screw on the bobbin case as this may result in
damage to the bobbin case, rendering it
unusable.
If the slotted-head screw (-) is difficult to turn,
do not use force. Turning the screw too much
or providing force in either (rotational)
direction may cause damage to the bobbin
case. Should damage occur, the bobbin case
may not maintain proper tension.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is NV800E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is NV800E in the language / languages: English as an attachment in your email.

The manual is 9,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is NV800E

Brother Innov-is NV800E User Manual - German - 100 pages

Brother Innov-is NV800E User Manual - Dutch - 100 pages

Brother Innov-is NV800E User Manual - French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info