618041
81
Zoom out
Zoom in
Previous page
1/144
Next page
Zipper Insertion
Sewing S-21
UTILITY STITCHES
S
e
Press the seam allowance so that the right side (the side
that will not be stitched) has an extra 3 mm (1/8 inch).
1 Wrong side of fabric
2 3 mm (1/8 inch)
f
Align the zipper teeth with the pressed edge of the
fabric having the extra 3 mm (1/8 inch), and then baste
or pin the zipper in place.
1 Zipper teeth
2 Basting stitching
g
Attach the presser foot holder to the right pin of zipper
foot “I”.
If the stitching will be sewn on the right side, attach the
presser foot holder to the left pin of the zipper foot.
1 Pin on the right side
2 Needle drop point
h
Select stitch .
i
Sew the zipper to the piece of fabric with the extra 3
mm (1/8 inch), starting from the base of the zipper.
j
When you are about 5 cm (2 inches) from the end of
the zipper, stop the machine with the needle lowered
(in the fabric), raise the presser foot lever.
k
Open the zipper and continue sewing.
l
Close the zipper, turn over the fabric, and then baste
the other side of the zipper to the fabric.
1 Basting stitching
m
Attach the presser foot holder to the other pin of
zipper foot “I”.
If the presser foot holder was attached to the right pin in
step
g, change it to the left pin.
1 Pin on the left side
2 Needle drop point
CAUTION
When using zipper foot “I”, be sure to select
the straight stitch (center needle position), and
slowly turn the handwheel toward you
(
counterclockwise)
to check that the needle
does not touch the presser foot. If a different
stitch is selected or the needle hits the presser
foot, the needle may bend or break.
1
2
2
1
2
1
I
CAUTION
When sewing, be sure that the needle does not
touch the zipper, otherwise the needle may
bend or break.
1
I
1
2
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is NV1300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is NV1300 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is NV1300

Brother Innov-is NV1300 User Manual - German - 144 pages

Brother Innov-is NV1300 User Manual - Dutch - 144 pages

Brother Innov-is NV1300 User Manual - French - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info