618041
65
Zoom out
Zoom in
Previous page
1/144
Next page
Sewing Various Fabrics
Sewing S-5
SEWING ATTRACTIVE FINISHES
S
Sewing stretch fabrics
First, baste the pieces of fabric together, and then sew without
stretching the fabric.
1 Basting
For best results when sewing on knit fabrics use the stretch
stitches. Also be sure to use a needle for knits. The
recommended stitches and their stitch numbers are indicated
below.
* Stitch patterns can be selected directly by pressing the
numeric keys on the machine during preset utility stitch
mode. Refer to “Basic operations” section.
Sewing leathers or vinyl fabrics
When sewing fabrics that may stick to the presser foot such as
leathers or coated fabrics, change the presser foot to the non
stick foot*. The walking foot* is also suitable for sewing some
leathers or vinyl fabrics.
* Sold separately with some models.
1 Leather
Sewing hook-and-loop fastener tape
Make sure that the needle passes through the hook-and-loop
fastener tape by turning the handwheel and lower the needle
into the hook-and-loop fastener tape before sewing. And then,
sew the edge of the hook-and-loop fastener tape at a slow
speed.
If the needle does not pass through the hook-and-loop
fastener tape, replace the needle with the needle size for
thicker fabrics. For details, refer to “Fabric/thread/needle
combinations” in the “Basic operations” section.
1 Edge of the hook-and-loop fastener tape
Stitch
Model 4 1-05 1-06 1-13 1-14 2-13
Model 3,2
05
* 06*
13
14
*
48
Model 1
05
* 06*
11
12
*
42
Note
The walking foot can only be used with straight
or zigzag stitch patterns with reinforcement
stitches. For details, refer to “Stitch Setting
Chart” in the “Basic operations” section.
When using the walking foot, test sew on a scrap
piece of leather or vinyl that is to be used in
project to make sure foot does not leave any
marks.
1
1
CAUTION
Use only the adhesive-free hook-and-loop
fastener tape which is designed for sewing.
When the glue adheres to the needle or the
bobbin hook race, it may cause malfunction.
If the hook-and-loop fastener tape is sewn with
the thin needle (65/9-75/11), the needle may
bend or break.
Note
Before sewing, baste together the fabric and the
hook-and-loop fastener tape.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is NV1300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is NV1300 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is NV1300

Brother Innov-is NV1300 User Manual - German - 144 pages

Brother Innov-is NV1300 User Manual - Dutch - 144 pages

Brother Innov-is NV1300 User Manual - French - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info