618041
36
Zoom out
Zoom in
Previous page
1/144
Next page
Replacing the Needle
B-28
Be sure to observe the following precautions concerning the handling of the needle. Failure to observe these precautions is
extremely dangerous, for example, if the needle breaks and fragments are dispersed. Be sure to read and carefully follow the
instructions below.
Fabric/thread/needle combinations
The machine needle that should be used depends on the fabric and thread thickness. Refer to the following table when choosing
the thread and needle appropriate for the fabric that you wish to sew.
Thread and needle number
The lower the thread number is, the heavier the thread;
the higher the needle number, the larger the needle.
Ball point needle (gold colored)
To avoid skipped stitches use ball point needles (75/
11–90/14) with stretch fabrics.
Transparent nylon thread
Use a 90/14 to 100/16 needle, regardless of the fabric or
thread.
Replacing the Needle
CAUTION
Only use recommended home machine needles. Use of any other needle may bend the needle or damage
the machine.
Never use bent needles. Bent needles can easily break, possibly resulting in injuries.
Fabric Type/Application Thread Size of Needle
Type Size
Medium weight
fabrics
Broadcloth Cotton thread
60–90
75/11–90/14
Taffeta Synthetic thread
Flannel, Gabardine Silk thread 50
Thin fabrics Lawn Cotton thread
60–90
65/9–75/11
Georgette Synthetic thread
Challis, Satin Silk thread 50
Heavy fabrics Denim
Cotton thread
30 100/16
50
90/14–100/16
Corduroy Synthetic thread
50–60
Tweed Silk thread
Stretch fabrics Jersey
Thread for knits 50–60
Ball point needle
75/11–90/14
(gold colored)
Tri c o t
Easily frayed fabrics
Cotton thread
50–90
65/9–90/14Synthetic thread
Silk thread 50
For top-stitching
Synthetic thread 30 100/16
Silk thread 50–90 90/11–90/14
Note
Never use thread of 20 weight or lower. It may
cause machine to malfunction.
CAUTION
The appropriate fabric, thread and needle
combinations are shown in the table above. If
the combination of the fabric, thread and
needle is not correct, particularly when sewing
heavy fabrics (such as denim) with thin
needles (such as 65/9 to 75/11), the needle
may bend or break. In addition, the stitching
may be uneven or puckered or there may be
skipped stitches.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is NV1300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is NV1300 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is NV1300

Brother Innov-is NV1300 User Manual - German - 144 pages

Brother Innov-is NV1300 User Manual - Dutch - 144 pages

Brother Innov-is NV1300 User Manual - French - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info