613641
97
Zoom out
Zoom in
Previous page
1/144
Next page
Reinforcement Stitching
Sewing S-37
UTILITY STITCHES
S
d
Position the fabric so that the needle is 2 mm (1/16
inch) in front of the area to be darned.
1 Tear
2 2 mm (1/16 inch)
Pass the upper thread down through the hole in the
presser foot, and then lower the presser foot.
When lowering the presser foot, do not push in the
front of the presser foot, otherwise the darning will
not be sewn with the correct size.
1 Do not reduce the gap.
e
Pull down the buttonhole lever as far as possible.
1 Buttonhole lever
The buttonhole lever is positioned behind the bracket
on the buttonhole foot.
1 Buttonhole lever
2 Bracket
f
Gently hold the end of the upper thread in your left
hand, and then start sewing.
g
Raise the presser foot lever, remove the fabric, and
then cut the threads.
h
Raise the buttonhole lever to its original position.
2
1
a
a
2
1
Memo
If the fabric does not feed, for example, because it
is too thick, increase the stitch length. For details,
refer to “Setting the stitch length” in the “Basic
operations” section.
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is NV1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is NV1100 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is NV1100

Brother Innov-is NV1100 Quick start guide - English, German - 32 pages

Brother Innov-is NV1100 User Manual - German - 144 pages

Brother Innov-is NV1100 Quick start guide - Dutch - 32 pages

Brother Innov-is NV1100 User Manual - Dutch - 144 pages

Brother Innov-is NV1100 Quick start guide - French - 32 pages

Brother Innov-is NV1100 User Manual - French - 144 pages

Brother Innov-is NV1100 Quick start guide - Italian, Spanish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info