718767
115
Zoom out
Zoom in
Previous page
1/120
Next page
Troubleshooting
Appendix A-19
MAINTENANCE AND TROUBLESHOOTING
A
Operation beep
Each time a key is pressed you will hear one beep. If an
incorrect operation is performed you will hear two or four
beeps.
If a key is pressed (correct operation)
One beep sounds.
If an incorrect operation is performed
Two or four beeps sound.
If the machine locks up, for example, because
the thread is tangled
The machine beeps for four seconds and the machine
automatically stops.
Be sure to check for the cause of the error and correct it
before continuing to sew.
Canceling the operation beep
a
Select (Buzzer) in the settings screen and set it to
“OFF”.
Nothing appears in the LCD
If nothing appears in the LCD when the machine is turned on,
the brightness of the LCD is either too light or too dark. If this
is the case, perform the following operation.
a
Turn off the machine.
b
While pressing (Reinforcement stitch button) on
the operation panel, turn on the sewing machine.
c
Press the “-” or “+” key.
Adjust the brightness of the LCD so that the screens can
be seen.
d
Turn off the machine, then turn it on again.
9
This message is displayed when the motor locks due to tangled thread or for other
reasons related to thread delivery.
10
This message is displayed when you try to sew with a stitch other than a straight
stitch (middle needle position) while the straight stitch needle plate is installed.
This message is also displayed when the needle plate is removed while the machine
is still turned on.
11
F**
If error message “F**” appears in the LCD while the machine is being used, the
machine may be malfunctioning.
Contact your nearest Brother authorized service center.
Error Messages Cause/Solution
115


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is NV1040SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is NV1040SE in the language / languages: English as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is NV1040SE

Brother Innov-is NV1040SE User Manual - German - 116 pages

Brother Innov-is NV1040SE User Manual - Dutch - 116 pages

Brother Innov-is NV1040SE User Manual - French - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info