718767

Brother Innov-is NV1040SE Manual

45
Zoom out
Zoom in
Previous page
1/120
Next page
Sewing
Basic operations B-37
STARTING TO SEW
B
Automatic reinforcement stitching
After selecting a stitch motif, turn on the automatic
reinforcement stitching function before sewing, and the
machine will automatically sew reinforcement stitches (or
reverse stitches, depending on the stitch motif) at the
beginning and end of sewing. Refer to the table on page B-37.
a
Select a stitch pattern.
b
Press to set the automatic reinforcement stitching
function.
→ The key will be lit.
c
Set the fabric in the start position and begin sewing.
1 Reverse stitches (or reinforcement stitches)
→ The machine will automatically sew reverse stitches
(or reinforcement stitches) and then continue sewing.
d
Press (Reverse stitch button) or (Reinforcement
stitch button).
1 Reverse stitches (or reinforcement stitches)
→ The machine will sew reverse stitches (or
reinforcement stitches) and stop.
The operation performed when the button is pressed differs
depending on the selected pattern. Refer to the following table
for details on the operation that is performed when the button
is pressed.
Memo
• Some stitches, such as buttonholes and bar
tacks, require reinforcement stitches at the
beginning of sewing. If you select one of these
stitches, the machine will automatically turn on
this function (the key is lit when the stitch is
selected).
Memo
• When selecting the stitches below, the machine
will automatically sew reverse stitches at the
beginning of the stitch.
• If you press the “Start/Stop” button to pause
sewing, press it again to continue. The machine
will not sew reverse/reinforcement stitches again.
Memo
• To turn off the automatic reinforcement stitching
function, press so that the key is no longer lit.
Reverse stitch
button
Reinforcement
stitch button
When the automatic
reinforcement
stitching function is
not active while
selecting stitches
such as examples
shown below:
Machine starts
sewing the stitches
and only sews
reverse stitches
while holding the
Reverse stitch
button.
Machine sews 3 - 5
reinforcement
stitches while
holding the
Reinforcement stitch
button.
When the automatic
reinforcement
stitching function is
active while selecting
stitches such as
examples shown
below:
Machine sews
reverse stitches at
the beginning and
end of sewing.
Machine sews
reverse stitches at
the beginning and
reinforcement
stitches at the end of
sewing.
When the automatic
reinforcement
stitching function is
not active while
selecting stitches
such as examples
shown below:
Machine starts
sewing the stitches
and only sews
reverse stitches
while holding the
Reverse stitch
button.
*
Machine starts
sewing the stitches
and sews 3 - 5
reinforcement
stitches while
holding the
Reinforcement stitch
button.
When the automatic
reinforcement
stitching function is
active while selecting
stitches such as
examples shown
below:
Machine sews
reinforcement
stitches at the
beginning and
reverse stitches at
the end of sewing.
*
Machine sews
reinforcement
stitches at the
beginning and end of
sewing.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is NV1040SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is NV1040SE in the language / languages: English as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is NV1040SE

Brother Innov-is NV1040SE User Manual - German - 116 pages

Brother Innov-is NV1040SE User Manual - Dutch - 116 pages

Brother Innov-is NV1040SE User Manual - French - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info