Manual Brother Innov-is M280D (page 72 of 100) (English)

718769

Zoom out

Zoom in

1/100

Embroidering

Adjusting thread tension

The upper thread tension is changed using the thread tension

dial.

When doing machine embroidery, the tension dial should be

set somewhere between 2 to 6.

■ Correct thread tension

The thread tension is correct when upper thread is just visible

on the wrong side (bottom) of the fabric.

■ Upper thread is too tight

The bobbin thread will be visible on the right side (top) of the

fabric. In this instance, decrease the upper thread tension.

■ Upper thread is too loose

The upper thread has slack. In this instance, increase the

upper thread tension.

Embroidering the appliqué patterns

When the color embroidering order display shows

[ (APPLIQUE MATERIAL)],

[ (APPLIQUE POSITION)] or

[ (APPLIQUE)], follow the procedure below.

Required materials

• Fabric for the appliqué piece

• Fabric for the appliqué base

• Stabilizer material

• Fabric glue or temporary spray adhesive

• Embroidering thread

■ 1. Creating an appliqué piece

Attach stabilizer material to the wrong side of the

appliqué fabric.

Sew the cutting line of the appliqué piece. Remove the

fabric for the appliqué piece from the embroidery

frame, and then carefully cut along the sewn cutting

line.

1 Outline of appliqué

2 Appliqué material

1 Loosen (Decrease the

number)

2 Tighten (Increase the

number)

3 Thread tension dial

Memo

• If the stitches appear loose, turn the tension up one

notch and embroider again.

1 Right side (top) of

fabric

2 Wrong side (bottom)

of fabric

1 Right side (top) of

fabric

2 Wrong side (bottom)

of fabric

1 Right side (top) of

fabric

2 Wrong side (bottom)

of fabric

Note

• If the upper thread is not threaded correctly or the

bobbin is not installed correctly, it may not be possible

to set the correct thread tension. If the correct thread

tension cannot be achieved, rethread the upper thread

and insert the bobbin correctly.

Note

• The correct names and numbers of the thread colors to

be used will not appear. Select the thread colors

depending on those in the appliqué pattern.

Note

• If the appliqué piece is cut out along the inside of the

cutting line, it may not be correctly attached to the

fabric. Therefore, carefully cut out the appliqué piece

along the cutting line.

• After cutting out the appliqué piece, carefully remove

the thread.

bonjour
je dois faire des coutures au point droit à 5mm du bord. comment faire le réglage. Merci Submitted on 15-11-2022 at 10:03
Reply Report abuse
bonjour
je souhaite faire des coutures à 0.5 cm avec ma brother 280. Comment faire
Merci bonne journée Submitted on 3-9-2022 at 10:38
Reply Report abuse
message sur brother 280 lorsque la commande de vitesse est réglée pour contrôler la largeur du point zigzag, la touche marche/arrêt ne fonctionne pas. Comment faire pour annuler cette commande Merci de m'aider Submitted on 27-5-2022 at 07:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is M280D in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is M280D

Brother Innov-is M280D User Manual - German - 100 pages

Brother Innov-is M280D User Manual - Dutch - 100 pages

Brother Innov-is M280D User Manual - French - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother Innov-is M280D Manual

Product: