718769
56
Zoom out
Zoom in
Previous page
1/100
Next page
Utility stitches
54
d
Put the extra spool pin in the hole on the top of the
machine and put the spool of thread onto the extra
spool pin.
e
Thread the machine with the second upper thread.
Without passing the thread behind the needle bar
thread guide, manually thread the right needle with the
second upper thread.
Insert the thread through the eye of the needle from the
front to the back.
f
Attach zigzag foot “J”.
For details on changing the presser foot, refer to
“Replacing the presser foot” on page 23.
g
Press to unlock all keys and buttons.
h
Press and set [Twin Needle] (page 1 of the settings
screen) to [ON].
i
Select a stitch.
For stitch selection refer to “Basic sewing” on
page 25.
Refer to “Stitch Chart” on page 35 for stitches that
use a twin needle. You can also sew with a twin
needle when you select a satin stitch pattern. In this
case, use zigzag foot “J”.
j
Start sewing.
Heirloom stitching
When sewing with the wing needle, the needle holes are
enlarged, creating a lace-like decorative stitch. This is used to
decorate hems and tablecloths on thin or medium weight
fabrics in addition to plain weave fabrics.
a
Install the wing needle.
Use a 130/705H 100/16 wing needle.
For details on installing a needle, refer to “Replacing
the needle” on page 22.
The needle threader cannot be used with the wing
needle, otherwise the machine may be damaged.
Manually pass the thread through the eye of the
needle from the front to the back.
b
Attach monogramming foot “N”.
c
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
1 Thread spool
2 Extra spool pin
1 Needle bar
thread
guide
CAUTION
When using the twin needle, be sure to attach
zigzag foot “J”. If bunched stitches occur, use
monogramming foot “N” or attach stabilizer
material.
CAUTION
When using the twin needle, be sure to select
the twin needle setting, otherwise the needle
may break or the machine may be damaged.
a
b
a
CAUTION
When using the twin needle, be sure to select
an appropriate stitch, otherwise the needle
may break or the machine may be damaged.
CAUTION
Do not try turning the fabric while the twin
needle is down in the fabric, otherwise the
needle may break or the machine may be
damaged.
No. 3-02 3-04 3-06 3-10
Stitch
CAUTION
When sewing with the wing needle, select a
stitch width of 6.0 mm (15/64 inch) or less,
otherwise the needle may bend or break.
After adjusting the stitch width, slowly turn
the handwheel toward you (
counterclockwise)
and check that the needle does not touch the
presser foot. If the needle hits the presser foot,
the needle may bend or break.
56


Need help? Post your question in this forum.

Forumrules
1

Forum

brother-innov-is-m280d

Reset search

  • bonjour
    je dois faire des coutures au point droit à 5mm du bord. comment faire le réglage. Merci Submitted on 15-11-2022 at 10:03

    Reply Report abuse
  • bonjour
    je souhaite faire des coutures à 0.5 cm avec ma brother 280. Comment faire
    Merci bonne journée Submitted on 3-9-2022 at 10:38

    Reply Report abuse
  • message sur brother 280 lorsque la commande de vitesse est réglée pour contrôler la largeur du point zigzag, la touche marche/arrêt ne fonctionne pas. Comment faire pour annuler cette commande Merci de m'aider Submitted on 27-5-2022 at 07:10

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is M280D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is M280D in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is M280D

Brother Innov-is M280D User Manual - German - 100 pages

Brother Innov-is M280D User Manual - Dutch - 100 pages

Brother Innov-is M280D User Manual - French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info