Manual Brother Innov-is M280D (page 49 of 100) (English)

718769

Zoom out

Zoom in

1/100

Utility stitches

VARIOUS STITCHES

Sew the two pieces of fabric together so the stitch

pattern spans over both pieces.

Use pins if necessary.

■ Piecing

Sewing together two pieces of fabric is called “piecing”. The

fabric pieces should be cut with a 6.5 mm (1/4 inch) seam

allowance.

Sew a piecing straight stitch 6.5 mm (1/4 inch) from either the

right side or the left side of the presser foot.

Baste or pin along the seam allowance of the fabric

that you wish to piece together.

Attach zigzag foot “J”.

Select a stitch.

• For details, refer to “Stitch Chart” on page 35.

Sew with the side of the presser foot aligned with the

edge of the fabric.

 For a seam allowance on the right side

Align the right side of the presser foot with the edge of the

fabric, and sew using stitch .

 For a seam allowance on the left side

Align the left side of the presser foot with the edge of the

fabric, and set the stitch width 1.5 mm (1/16 inch) and

sew using stitch .

■ Quilting

Sandwiching batting between the top and bottom layers of

fabric is called “quilting”. Quilts can easily be sewn using the

walking foot* and the quilting guide*.

* Items sold separately, please contact your authorized

Brother dealer.

Baste the fabric to be quilted.

Remove the presser foot and the presser foot holder.

• For details, refer to “Removing and attaching the

presser foot holder” on page 24.

Hook the connecting fork of the walking foot onto the

needle clamp screw.

Lower the presser foot lever, and then tighten the

presser foot holder screw with the screwdriver.

CAUTION

• Do not stitch over pins.

No. 1-25

Stitch

1 6.5 mm (1/4 inch)

Memo

• To change the width of the seam allowance (needle

position), adjust the stitch width. For details, refer to

“Setting the stitch width” on page 29 and “Sewing an

even seam allowance” on page 31.

Note

• Thread the needle manually when using the walking

foot, or attach the walking foot only after threading the

needle using the needle threader.

• When quilting, use a 90/14 home sewing machine

needle.

• The walking foot can only be used with straight or

zigzag stitch patterns. Do not sew reverse stitches with

the walking foot.

• When sewing with the walking foot, sew at a speed

between slow and medium.

• When using the walking foot, test sew on a scrap piece

of fabric that is to be used in project.

1 Connecting fork

2 Needle clamp screw

bonjour
je dois faire des coutures au point droit à 5mm du bord. comment faire le réglage. Merci Submitted on 15-11-2022 at 10:03
Reply Report abuse
bonjour
je souhaite faire des coutures à 0.5 cm avec ma brother 280. Comment faire
Merci bonne journée Submitted on 3-9-2022 at 10:38
Reply Report abuse
message sur brother 280 lorsque la commande de vitesse est réglée pour contrôler la largeur du point zigzag, la touche marche/arrêt ne fonctionne pas. Comment faire pour annuler cette commande Merci de m'aider Submitted on 27-5-2022 at 07:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is M280D in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is M280D

Brother Innov-is M280D User Manual - German - 100 pages

Brother Innov-is M280D User Manual - Dutch - 100 pages

Brother Innov-is M280D User Manual - French - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother Innov-is M280D Manual

Product: