718768

Brother Innov-is M240ED Manual

23
Zoom out
Zoom in
Previous page
1/52
Next page
Embroidering Preparation
21
EMBROIDERY
2
Hooping the fabric in the embroidery frame
■ Attaching iron-on stabilizers (backing) to the
fabric
For best results in your embroidery projects, always use
stabilizer material for embroidery.
a
Press the iron-on stabilizer material to the wrong side
of the fabric.
• Use a piece of stabilizer which is larger than the
embroidery frame being used.
■ Inserting the Fabric
• Use fabrics with a thickness of less than 2 mm
(1/16 inch). Using fabrics thicker than 2 mm
(1/16 inch) may cause the needle to break.
• Always use a stabilizer material for embroidery
when embroidering stretch fabrics, lightweight
fabrics, fabrics with a coarse weave, or fabrics
which cause pattern shrinkage. Otherwise, the
needle may break and cause injury.
1 Fusible side of
stabilizer
2 Fabric (wrong side)
3 Size of the
embroidery frame
b
c
a
Memo
• When embroidering small pieces of fabric that cannot
be hooped on an embroidery frame, use stabilizer
material as a base. After lightly ironing the fabric to the
stabilizer material, hoop it in the embroidery frame. If
stabilizer material cannot be ironed onto the fabric,
attach it with a basting stitch. After completing the
embroidery, remove the stabilizer material carefully.
• When embroidering on thin fabrics such as organdy or
lawn, or on napped fabrics such as terry cloth or
corduroy, use water soluble stabilizer (sold separately)
for best results. The water soluble stabilizer material will
dissolve completely in water, giving the project a more
attractive finish.
• In the case of thick terry cloth towels we recommend
that you place a piece of water soluble stabilizer on the
top surface of the towel. This will help to reduce the nap
of the toweling and result in more attractive embroidery.
• When using fabrics that cannot be ironed (such as terry
cloth or fabrics that have loops which expand when
ironed) or in places where ironing is difficult, position the
stabilizer material under the fabric without fusing it, then
position the fabric and stabilizer in the embroidery
frame, or check with your authorized Brother dealer for
the correct stabilizer to use.
• If you use a frame that is too small, the presser
foot may strike the frame during embroidering
and cause injury or may damage your
machine.
Note
• If the fabric is not securely held in the embroidery frame,
the embroidery pattern will embroider out poorly. Insert
the fabric on a level surface, and gently pull the fabric
taut in the frame, being careful not to distort hooped
fabric.
1 Fabric
2 Stabilizer
3 Basting
a
b
c
… 23 …


Need help? Post your question in this forum.

Forumrules
1

Forum

brother-innov-is-m240ed

Reset search

  • HI!
    Is there the M240ED User Manual in Portuguese??

    Thank you Submitted on 29-8-2023 at 18:42

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is M240ED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is M240ED in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is M240ED

Brother Innov-is M240ED User Manual - German - 52 pages

Brother Innov-is M240ED User Manual - Dutch - 52 pages

Brother Innov-is M240ED User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info