718743
133
Zoom out
Zoom in
Previous page
1/144
Next page
Troubleshooting
Appendix A-15
MAINTENANCE AND TROUBLESHOOTING
A
The thread is
tangled on the
wrong side of the
fabric.
Upper threading is incorrect.
Check the steps for threading the machine and
rethread the machine.
Be sure that the presser foot is in the raised
position when threading the machine so that the
upper thread sets properly in the upper tension.
B-21, A-5
Using improper needle or thread for the
selected fabric.
Check the “Fabric/Thread/Needle
Combinations” chart.
B-28
The upper thread is
too tight.
The bobbin thread is incorrectly installed. Correctly install the bobbin thread. B-18, A-4
Bobbin thread
breaks.
Bobbin is set incorrectly. Reset the bobbin correctly. B-18
Bobbin thread is incorrectly wound. Use a correctly wound bobbin. B-15
There are scratches on the bobbin or it doesn’t
rotate properly.
Replace the bobbin. B-18
Thread is tangled.
Use scissors, etc. to cut the tangled thread and
remove it from the race, etc.
A-8
A bobbin designed specifically for this machine
is not used.
Incorrect bobbins will not work properly. Only
use a bobbin designed specifically for this
machine.
B-15
Fabric puckers.
There is a mistake in the upper or bobbin
threading.
Check the steps for threading the machine and
rethread it correctly.
B-21
Spool cap is set incorrectly.
Check the method for attaching the spool cap,
then reattach the spool cap.
B-21
Using improper needle or thread for the
selected fabric.
Check the “Fabric/Thread/Needle
Combinations” chart.
B-28
Needle is turned, bent or the point is dull. Replace the needle. B-29
Stitches are too long when sewing thin fabrics. Shorten the stitch length. B-40
Thread tension is set incorrectly. Adjust the thread tension. B-41
Wrong presser foot. Use the correct presser foot. B-32
Skipped stitches
Machine is threaded incorrectly.
Check the steps for threading the machine and
rethread it correctly.
B-21
Using improper needle or thread for the
selected fabric.
Check the “Fabric/Thread/Needle
Combinations” chart.
B-28
Needle is turned, bent or the point is dull. Replace the needle. B-29
Needle is installed incorrectly. Reinstall the needle correctly. B-29
The needle is worn/damaged. Replace the needle. B-29
Dust or lint has collected under the needle
plate.
Remove the dust or lint with the brush. A-2
Thin or stretch fabrics are being sewn.
Sew with one sheet of thin paper under the
fabric.
S-4, D-3
No stitching
Needle is turned, bent or the point is dull. Replace the needle. B-29
Bobbin is set incorrectly. Reset the bobbin thread correctly. B-18
Upper threading is incorrect.
Check the steps for threading the machine and
rethread the machine.
B-21
Symptom Probable Cause Remedy Reference
133


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is F460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is F460 in the language / languages: English as an attachment in your email.

The manual is 7,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is F460

Brother Innov-is F460 User Manual - German - 144 pages

Brother Innov-is F460 User Manual - Dutch - 144 pages

Brother Innov-is F460 User Manual - French - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info