718742
88
Zoom out
Zoom in
Previous page
1/100
Next page
Care and Maintenance
A-4
j
Insert the tabs on the needle plate cover into the
needle plate, and then slide the cover back on.
1 Needle plate cover
About the maintenance message
Once this message appears, it is recommended to take your
machine to an authorized Brother dealer or nearest Brother
authorized service center for a regular maintenance check.
Although this message will disappear and the machine will
continue to function once you press , the message will
display several more times until the appropriate maintenance
is performed.
Please take the time to arrange the maintenance your machine
requires once this message appears. Such steps will help to
ensure you receive continued, uninterrupted hours of
machine operation for the future.
Touch panel is malfunctioning
If the screen does not respond correctly when you touch a key
(the machine does not perform the operation or performs a
different operation), follow the steps below to make the
proper adjustments.
a
Holding your finger on the screen, turn the main
power switch to OFF and back to ON.
The touch panel adjustment screen is displayed.
b
Lightly touch the center of each +, in order from 1 to 5.
c
Turn the main power to OFF, then turn it back to ON.
Operation beep
Each time a key is pressed you will hear one beep. If an
incorrect operation is performed you will hear two or four
beeps.
If a key is pressed (correct operation)
One beep sounds.
If an incorrect operation is performed
Two or four beeps sound.
If the machine locks up, for example, because
the thread is tangled
The machine beeps for four seconds and the machine
automatically stops.
Be sure to check for the cause of the error and correct it
before continuing to sew.
CAUTION
Never use a bobbin case that is scratched,
otherwise the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new bobbin
case, contact your nearest Brother authorized
service center.
Be sure that the bobbin case is correctly
installed, otherwise the needle may break.
a
Do not press too hard on the screen. Otherwise,
damage may result.
If you finish the screen adjustment and the
screen still does not respond, or if you cannot do
the adjustment, contact your authorized Brother
dealer.
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is F440E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is F440E in the language / languages: English as an attachment in your email.

The manual is 6,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is F440E

Brother Innov-is F440E User Manual - German - 100 pages

Brother Innov-is F440E User Manual - Dutch - 100 pages

Brother Innov-is F440E User Manual - French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info