718715
66
Zoom out
Zoom in
Previous page
1/72
Next page
Troubleshooting
64
After sewing
A broken needle has fallen into the machine.
Turn off the machine, and remove the needle
plate. If the needle that fell into the machine
can be seen, use tweezers to remove it. After
removing the needle, return the needle plate to
its original position and insert a new needle.
Before turning on the machine, slowly turn the
handwheel toward you to check that it turns
smoothly and that the new needle enters
through the center of the needle plate opening.
If the handwheel does not turn smoothly or the
needle that fell into the machine cannot be
removed, consult your authorized Brother
dealer or the nearest Brother authorized
service center.
59
The handwheel does not turn smoothly.
Thread is tangled in the bobbin case. 55, 57,
59
Symptom, Cause/solution
Reference
Thread tension is incorrect.
Upper threading is incorrect. 15, 58
Bobbin is set incorrectly. 14, 58
Using improper needle or thread for the selected
fabric.
19
Presser foot holder is not attached correctly. 21
Thread tension is set incorrectly. 27, 58
Bobbin thread is incorrectly wound. 14
Needle is turned, bent or the point is dull. 20
A bobbin designed specifically for this machine is
not used.
12
Decorative stitch patterns are misaligned.
Wrong presser foot was used. 33
Stitch pattern adjustment settings were set
incorrectly.
54
Stitch pattern is irregular.
Wrong presser foot was used. 21
Thin or stretch fabrics are being sewn.
Attach stabilizer material to the fabric.
30
Thread tension is set incorrectly. 27, 58
Fabric was pulled, pushed or fed at an angle
while it was being sewn.
Sew while guiding the fabric with your hands
so that the fabric is fed in a straight line.
23
Symptom, Cause/solution
Reference
The thread is tangled, for example, in the bobbin
case.
55
Symptom, Cause/solution
Reference
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is A80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is A80 in the language / languages: English as an attachment in your email.

The manual is 27,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is A80

Brother Innov-is A80 User Manual - German - 72 pages

Brother Innov-is A80 User Manual - Dutch - 72 pages

Brother Innov-is A80 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info