718715
55
Zoom out
Zoom in
Previous page
1/72
Next page
Utility stitches
53
VARIOUS STITCHES
3
i
Set the machine to use the twin needle setting. The
setting procedure differs depending on the model.
For models equipped with a needle mode selection key
Press (Needle mode selection key).
The twin needle mode is selected.
For models not equipped with a needle mode selection
key
When the following stitch is selected, set the stitch
width between 1.0 mm (1/16 inch) and 6.0 mm (15/64
inch) .
When any of the following stitches is selected, set the
stitch width to 5.0 mm (3/16 inch) or less.
After specifying the settings, turn the handwheel toward
you and check that the needle does not touch the
presser foot.
j
Start sewing.
Heirloom stitching
When sewing with the wing needle, the needle holes are
enlarged, creating a lace-like decorative stitch. This is used to
decorate hems and tablecloths on thin or medium weight
fabrics in addition to plain weave fabrics. (Only for models
that include monogramming foot “N”)
a
Install the wing needle.
Use a 130/705H 100/16 wing needle.
For details on installing a needle, refer to “Replacing
the needle” on page 20.
The needle threader cannot be used with the wing
needle, otherwise the machine may be damaged.
Manually pass the thread through the eye of the
needle from the front to the back.
b
Attach monogramming foot “N”.
c
Select a stitch.
For details, refer to “Stitch Chart” on page 33.
d
Start sewing.
CAUTION
When using the twin needle, be sure to select
the twin needle setting, otherwise the needle
may break or the machine may be damaged.
No. 02
Stitch
No. 03 04 09 11 12
Stitch
CAUTION
Do not try turning the fabric while the twin
needle is down in the fabric, otherwise the
needle may break or the machine may be
damaged.
If bunched stitches occur, use monogramming
foot “N” (for 80/60/50 stitches models) or
attach stabilizer material.
Stitch
No.
37 35 34
38 36 35
40 37 36
41 38
CAUTION
When sewing with the wing needle, select a
stitch width of 6.0 mm (15/64 inch) or less,
otherwise the needle may bend or break.
After adjusting the stitch width, slowly turn
the handwheel toward you (
counterclockwise)
and check that the needle does not touch the
presser foot. If the needle hits the presser foot,
the needle may bend or break.
80
stitches
60
stitches
50
stitches
16
stitches
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is A80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is A80 in the language / languages: English as an attachment in your email.

The manual is 27,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is A80

Brother Innov-is A80 User Manual - German - 72 pages

Brother Innov-is A80 User Manual - Dutch - 72 pages

Brother Innov-is A80 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info