718715
23
Zoom out
Zoom in
Previous page
1/72
Next page
Replacing the Presser Foot
GETTING READY
21
1
Replacing the presser foot
a
Press (Needle position button) once or twice to
raise the needle.
b
Turn off the machine.
c
Raise the presser foot lever.
d
Press the black button at the back of the presser foot
holder in order to remove the presser foot.
e
Place the appropriate presser foot below the presser
foot holder so that the presser foot pin is aligned with
the notch in the presser foot holder.
f
Slowly lower the presser foot lever so that the presser
foot pin snaps into the notch in the presser foot holder.
1 Presser foot lever
2 Presser foot holder
3 Notch in the presser foot holder
4 Presser foot pin
The presser foot is attached.
g
Raise the presser foot lever to check that the presser
foot is securely attached.
h
Turn on the machine.
Replacing the Presser Foot
CAUTION
Use the appropriate presser foot for the type
of stitch that you wish to sew, otherwise the
needle may hit the presser foot, causing the
needle to bend or break. For details on the
presser foot that should be used with the
selected stitch, refer to “Stitch Chart” on
page 33.
Only use presser feet designed specifically for
this machine. Use of any other presser foot
may result in injuries or damage to the
machine.
Note
When a stitch is selected, the symbol for the presser
foot that should be used is shown in the LCD or the
stitch pattern display window. Check that the
appropriate presser foot is attached before starting to
sew. If the wrong presser foot is attached, attach the
appropriate presser foot.
The position where the symbol for the presser foot is
shown differs depending on the model.
* The symbols for certain presser feet, such as zipper foot “I”
and the quilting foot, may not appear in the screen.
CAUTION
Before replacing the presser foot, be sure to
turn off the machine, otherwise injuries may
occur if the “Start/Stop” button or any other
button is pressed and the machine starts
operating.
/
1 Black button
2 Presser foot holder
1 Presser foot holder
2 Notch in the presser foot
holder
3 Presser foot pin
4 Presser foot type
a
b
J
1
4
2
3
a
b
c
d
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is A80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is A80 in the language / languages: English as an attachment in your email.

The manual is 27,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is A80

Brother Innov-is A80 User Manual - German - 72 pages

Brother Innov-is A80 User Manual - Dutch - 72 pages

Brother Innov-is A80 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info