718735
65
Zoom out
Zoom in
Previous page
1/72
Next page
Troubleshooting
63
APPENDIX
4
Bobbin thread breaks.
Bobbin is set incorrectly. 14
Bobbin thread is incorrectly wound. 12
A scratched bobbin is being used. 14
Thread is tangled. 59
A bobbin designed specifically for this machine is
not used.
12
Fabric puckers.
There is a mistake in the upper or bobbin
threading.
12, 15
Spool of thread is set incorrectly. 12
Using improper needle or thread for the selected
fabric.
19
Needle is turned, bent or the point is dull. 20
Stitches are too long when sewing thin fabrics. 27
Thread tension is set incorrectly. 27, 58
Wrong presser foot was used. 21
The stitch is not sewn correctly.
The presser foot that is used is not appropriate
for the type of stitch that you wish to sew.
21
The thread tension is incorrect.
27, 58
The thread is tangled, for example, in the bobbin
case.
59
Feed dogs are set in the down position.
Slide the feed dog position switch to the right
().
5, 48
Skipped stitches
Machine is threaded incorrectly. 12, 15
Using improper needle or thread for the selected
fabric.
19
Needle is turned, bent or the point is dull. 20
Needle is installed incorrectly. 20
Dust or lint has collected under the needle plate. 55
Thin or stretch fabrics are being sewn.
Sew with non-woven water soluble stabilizer
under the fabric.
30
Symptom, Cause/solution
Reference
Not stitching
Needle is turned, bent or the point is dull. 20
Bobbin is set incorrectly. 14
Upper threading is incorrect. 15
High-pitched sound while sewing
Dust or lint is caught in the feed dogs. 55
Pieces of thread are caught in the race. 55
Upper threading is incorrect. 15
A bobbin designed specifically for this machine is
not used.
12
There are needle holes or friction scratches in the
bobbin case.
*
Fabric does not feed through the machine.
Feed dogs are set in the down position.
Slide the feed dog position switch to the right
().
5
Stitches are too close together. 27
Wrong presser foot was used. 21
Needle is turned, bent or the point is dull. 20
Thread is entangled. 59
Zigzag foot “J” is slanted on a thick seam at the
beginning of stitching.
30
The fabric feeds in the opposite direction.
The feed mechanism is damaged. *
The needle contacts the needle plate.
The needle clamp screw is loose. 20
Needle is turned, bent or the point is dull. 20
Fabric being sewn with the machine cannot be
removed.
Thread is tangled below the needle plate. 59
Symptom, Cause/solution
Reference
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is A60 SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is A60 SE in the language / languages: English as an attachment in your email.

The manual is 27,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is A60 SE

Brother Innov-is A60 SE User Manual - German - 72 pages

Brother Innov-is A60 SE User Manual - Dutch - 72 pages

Brother Innov-is A60 SE User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info