Manual Brother Innov-is A60 SE (page 43 of 72) (English)

718735

Zoom out

Zoom in

1/72

Utility stitches

VARIOUS STITCHES

The part names of buttonhole foot “A”, which is used to create

buttonholes, are indicated below.

Use chalk to mark on the fabric the position and length

of the buttonhole.

Pull out the button guide plate of buttonhole foot “A”,

and then insert the button that will be put through the

buttonhole.

■ If the button does not fit in the button guide

plate

Add together the diameter and thickness of the button,

and then set the button guide plate to the calculated

length. (The distance between the markings on the presser

foot scale is 5 mm (3/16 inch).)

Example: For a button with a diameter of 15 mm (9/16

inch) and a thickness of 10 mm (3/8 inch), the button

guide plate should be set to 25 mm (1 inch) on the scale.

 The size of the buttonhole is set.

Attach buttonhole foot “A”.

Position the upper thread under the presser foot by

guiding thread through the hole in the presser foot

before attaching the buttonhole foot “A”.

Select a stitch.

• For details, refer to “Stitch Chart” on page 33.

1 Button guide plate

2 Presser foot scale

3 Presser foot pin

4 Marks on

buttonhole foot

5 5 mm (3/16 inch)

Note

• Before sewing buttonholes, check the stitch length and

width by sewing a trial buttonhole on a scrap piece of

fabric used for your project.

1 Marks on fabric

2 Buttonhole sewing

1 Presser foot scale

2 Length of

buttonhole

(diameter +

thickness of

button)

3 5 mm (3/16 inch)

1 10 mm (3/8 inch)

2 15 mm (9/16 inch)

Stitch

No.

42 39 37 15

43–––

44 40 38 14

45 41 39 –

46 42 40 –

47 43 41 16

48 44 – –

49–––

stitches

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is A60 SE in the language / languages: English as an attachment in your email.

The manual is 27,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is A60 SE

Brother Innov-is A60 SE User Manual - German - 72 pages

Brother Innov-is A60 SE User Manual - Dutch - 72 pages

Brother Innov-is A60 SE User Manual - French - 72 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother Innov-is A60 SE Manual

Product: