718735
29
Zoom out
Zoom in
Previous page
1/72
Next page
Adjusting the thread tension
27
SEWING BASICS
2
Reinforcement priority
When reinforcement priority is turned on, reinforcement
stitches will be sewn at the beginning and/or end of sewing a
reinforcement stitch pattern, even if (Reverse stitch button)
is pressed. For details, refer to “Automatic reverse/
reinforcement stitching” on page 25.
a
Turn off the machine.
b
While pressing (Reinforcement stitch button), turn
on the sewing machine.
c
Press the “-” or “+” key.
The value in the LCD changes from “ ” to
“”.
d
Turn off the machine, then turn it on again.
Reinforcement priority is turned on.
Setting the stitch width/stitch length
This machine is preset with the default settings for the
stitch width and stitch length for each stitch. These settings
can be changed as needed.
Setting the stitch width
The stitch width (zigzag width) can be adjusted to make the
stitch wider or narrower.
When the stitch width is changed from the default setting,
around disappears. When the stitch width is reset
back to the default setting, reappears around .
Setting the stitch length
The stitch length can be adjusted to make the stitch coarser
(longer) or finer (shorter).
When the stitch length is changed from the default setting,
around disappears. When the stitch length is reset
back to the default setting, reappears around .
You may need to change the thread tension, depending on the
fabric and thread being used.
Correct thread tension
The upper thread and the bobbin thread should cross near
the center of the fabric. Only the upper thread should be
visible from the right side of the fabric, and only the
bobbin thread should be visible from the wrong side of the
fabric.
Memo
When the same operation is performed, the
reinforcement priority is turned off.
Memo
To return the settings to their defaults, turn off the
machine, or select a different stitch.
If a straight stitch or triple stretch stitch is selected,
changing the stitch width changes the needle position.
Increasing the width moves the needle to the right;
reducing the width moves the needle to the left.
(page 27)
CAUTION
After adjusting the stitch width, slowly turn
the handwheel toward you (counterclockwise)
and check that the needle does not touch the
presser foot. If the needle hits the presser foot,
the needle may bend or break.
If the stitches are bunched together, increase
the stitch length. Continuing to sew with the
stitches bunched together may result in the
needle bending or breaking.
Adjusting the thread tension
1 Wrong side of fabric
2 Right side of fabric
3 Upper thread
4 Bobbin thread
1
2
3
4
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is A60 SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is A60 SE in the language / languages: English as an attachment in your email.

The manual is 27,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is A60 SE

Brother Innov-is A60 SE User Manual - German - 72 pages

Brother Innov-is A60 SE User Manual - Dutch - 72 pages

Brother Innov-is A60 SE User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info