718735
13
Zoom out
Zoom in
Previous page
1/72
Next page
Changing the Machine Settings
GETTING READY
11
1
Changing the needle stop position
The needle position when stitching is finished can be
changed from the down position to the up position.
a
Press the needle position button and hold for
approximately 3 seconds.
The machine beeps twice, and the needle stop
position changes to the up position.
Changing the initial needle position (For 80/
60/50 stitches models)
The stitch automatically selected when the machine is
turned on can be changed from “1 Straight stitch (Left)” to
“3 Straight stitch (Middle)”.
a
Press and hold the “–” stitch length key while turning
on the machine.
The machine beeps once, and the initial needle
position changes to “3 Straight stitch (Middle)”.
Turning on/off the buzzer
The buzzer can be turned off.
a
Press and hold “–” stitch width key while turning on
the machine.
The machine starts up with no beep, and the buzzer
is turned off.
Changing the Machine Settings
Memo
When the same operation is performed, the machine
beeps once, and the needle stop position changes to
the down position.
When this setting is changed, the machine beeps, even
if the buzzer is turned off.
Memo
When the same operation is performed, the machine
beeps once, and the initial needle position changes to
“1 Straight stitch (Left)”.
When this setting is changed, the machine beeps, even
if the buzzer is turned off.
Memo
When the same operation is performed, the machine
beeps once, and the buzzer is turned on.
CAUTION
When the needle stop position or initial needle
position is changed, the machine will beep,
even if the buzzer has been turned off.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is A60 SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is A60 SE in the language / languages: English as an attachment in your email.

The manual is 27,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is A60 SE

Brother Innov-is A60 SE User Manual - German - 72 pages

Brother Innov-is A60 SE User Manual - Dutch - 72 pages

Brother Innov-is A60 SE User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info