718716
64
Zoom out
Zoom in
Previous page
1/72
Next page
Troubleshooting
62
While sewing
The sewing lamp does not come on.
The sewing light is damaged.
Contact your authorized Brother dealer or the
nearest Brother authorized service center.
The LCD screen is fogged up.
Condensation has formed on the LCD screen.
After a while, the cloudiness will disappear.
Symptom, Cause/solution
Reference
Machine does not operate.
“Start/Stop” button was not pressed. 23
The bobbin winder shaft is pushed to the right. 12
There is no stitch selected. 23
Presser foot is not lowered. 24
“Start/Stop” button was pressed with the foot
controller attached.
24
Needle breaks.
Needle is installed incorrectly. 20
Needle clamp screw is not tightened. 20
Needle is turned or bent. 20
Using improper needle or thread for the selected
fabric.
19
Wrong presser foot was used. 21
Upper thread tension is too tight. 27
Fabric is pulled during sewing.
Spool of thread is set incorrectly. 12
There are scratches around the opening in the
needle plate.
* There is a notch on the left side of the opening
in the needle plate. This is not a scratch.
*
There are scratches around the opening in the
presser foot.
*
There are scratches on the bobbin case. *
A bobbin designed specifically for this machine is
not used.
12
Upper threading is incorrect. 15
Symptom, Cause/solution
Reference
1 Notch
a
Bobbin is set incorrectly. 14
Presser foot is attached incorrectly. 21
Screw of the presser foot holder is loose. 22
Fabric is too thick. 19, 30
Fabric is fed forcefully when sewing thick fabric
or thick seams.
30
Stitch length is too short. 27
Bobbin thread is incorrectly wound. 12
Upper thread breaks.
Machine is not threaded correctly (used the
wrong spool cap, spool cap is loose, the thread
did not catch the needle bar threader, etc.).
15
Knotted or tangled thread is being used.
The selected needle is not appropriate for the
thread being used.
19
Upper thread tension is too tight. 27
Thread is tangled. 57
Needle is turned, bent or the point is dull. 20
Needle is installed incorrectly. 20
There are scratches around the opening of the
needle plate.
* There is a notch on the left side of the opening
in the needle plate. This is not a scratch.
*
There are scratches around the opening in the
presser foot.
*
There are scratches on the bobbin case. *
Using improper needle or thread for the selected
fabric.
19
A bobbin designed specifically for this machine is
not used.
12
The thread is tangled on the wrong side of the fabric.
Upper threading is incorrect. 15, 58
Using improper needle or thread for the selected
fabric.
19
The upper thread is too tight.
The bobbin thread is incorrectly installed. 14, 57
Symptom, Cause/solution
Reference
1 Notch
a
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is A16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is A16 in the language / languages: English as an attachment in your email.

The manual is 27,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is A16

Brother Innov-is A16 User Manual - German - 72 pages

Brother Innov-is A16 User Manual - Dutch - 72 pages

Brother Innov-is A16 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info