613560
60
Zoom out
Zoom in
Previous page
1/88
Next page
58
EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
c
Lower the presser foot lever.
a Presser foot lever
d
Press (Start/stop button).
a Start/stop button
e
After progressing 5-6 stitches, press (Start/
stop button) to stop the machine.
f
Use scissors to cut the thread at the beginning
of the stitching.
Cut the thread at the edge of the stitching.
If the thread is left at the beginning of the
stitching, it may be sewn over as you
continue embroidering the pattern, making it
very difficult to deal with the thread after the
pattern is finished. Trim the thread at the
beginning.
g
Press (Start/stop button) again.
X The embroidery starts again and stops
automatically with reinforcement after one
color has been completed. When automatic
thread cutting is set, the thread is cut.
h
Press (Thread cutter button) once.
a Thread cutter button
X The needle is raised and the threads are cut.
CAUTION
i
Set up embroidery thread for the next color,
and repeat steps
a through h.
j
Cut the excess thread.
X When the last color is embroidered,
“Finished sewing.” will appear on the
display. Press , and the display will
return to the initial screen.
Memo
z For the automatic cutting setting, refer to
“LCD (liquid crystal display) operation
(page 50).
1
1
Do not press (Thread cutter button)
after threads have already been cut,
otherwise the needle may break, the
threads may become tangled or damage
to the machine may occur.
Do not press (Thread cutter button) if
there is no fabric under the embroidery
foot or while the machine is
embroidering, otherwise damage to the
machine may occur.
1
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 700E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 700E in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 700E

Brother Innov-is 700E Quick start guide - English - 24 pages

Brother Innov-is 700E User Manual - German - 88 pages

Brother Innov-is 700E Quick start guide - German - 24 pages

Brother Innov-is 700E User Manual - Dutch - 88 pages

Brother Innov-is 700E Quick start guide - Dutch - 24 pages

Brother Innov-is 700E User Manual - French - 88 pages

Brother Innov-is 700E Quick start guide - French, Italian, Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info