613636
78
Zoom out
Zoom in
Previous page
1/88
Next page
76
APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Stitches are
skipped.
The upper thread was not
threaded correctly.
Correct the upper threading. page 30
The needle is bent or blunt. Replace the needle. page 35
The needle is incorrectly installed. Correctly install the needle. page 36
Dust has accumulated under the
needle plate or in the bobbin case.
Remove the needle plate cover and
clean the race.
page 70
A high-pitched
noise is made
while
embroidering.
Dust has accumulated in the
bobbin case.
Clean the race. page 70
The upper thread was not
threaded correctly.
Correct the upper threading. page 30
The bobbin case is scratched, or
has a burr on it.
Replace the bobbin case. Contact
your retailer or the nearest authorized
service center.
A bobbin designed specifically for
this machine is not used.
Incorrect bobbins will not work
properly. Only use a bobbin
designed specifically for this
machine.
page 24
The thread does
not pass through
the eye of the
needle.
The needle has not been raised to
the correct position.
Press the needle position button. page 32
The needle is incorrectly installed. Correctly install the needle. page 36
The stitch is not
sewn correctly.
The thread tension is incorrect.
Adjust the tension of the upper
thread.
page 64
The thread is tangled, for example,
in the bobbin case.
Remove the tangle thread. If the
thread is tangled in the bobbin case,
clean the race.
page 70
The lamps do not
come on.
The lamps are damaged.
Contact your retailer or the nearest
authorized service center.
The machine is not turned on. Turn on the machine. page 19
Nothing appears
on the LCD.
The brightness of the LCD is either
too light or too dark.
Adjust the brightness of the LCD. page 81
Machine does not
operate when
button is pressed.
An animation is displayed on the
LCD.
Touch the LCD with your finger, and
the animation will disappear.
page 20
Embroidery unit
does not move.
No pattern selected. Select a pattern. page 49
The embroidery unit is not set up
correctly.
Set up the embroidery unit correctly. page 15
Embroidering
continues
although the
bobbin thread
ran out.
Dust has collected on the bobbin
thread sensor.
Remove any dust from the bobbin
thread sensor.
page 70
Symptom Probable Cause Remedy Reference
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 700E II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 700E II in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 700E II

Brother Innov-is 700E II Quick start guide - English, German - 24 pages

Brother Innov-is 700E II User Manual - German - 88 pages

Brother Innov-is 700E II Quick start guide - Dutch - 24 pages

Brother Innov-is 700E II User Manual - Dutch - 88 pages

Brother Innov-is 700E II Quick start guide - French - 24 pages

Brother Innov-is 700E II User Manual - French - 88 pages

Brother Innov-is 700E II Quick start guide - Italian, Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info