613559
355
Zoom out
Zoom in
Previous page
1/380
Next page
TROUBLESHOOTING
353
Appendix
9
Loops appear on the
surface of the fabric
when embroidering
The thread tension is incorrectly set. Adjust the thread tension. 233 - 235
The tension of the upper thread is incorrectly set
for the combination of the fabric, thread and
pattern being used.
Use the embroidery needle plate cover. 219
The combination of the bobbin case and bobbin
thread is incorrect.
Change the bobbin case or bobbin thread so
that the correct combination is used.
218
Machine does not
operate
There is no pattern selected. Select a pattern. 91, 156, 190, 265
“Start/Stop” button was not pushed. Press the “Start/Stop” button. 15
Main power switch is not turned on. Turn the main power to ON. 26
Presser foot is not lowered. Lower the presser foot. 15
“Start/Stop” button was pushed with the foot
controller attached.
Remove the foot controller, or use the foot
controller to operate the machine.
73
The “Start/Stop” button was pressed while the
machine is set for the sewing speed controller to
control the zigzag stitch width.
Use the foot controller instead of the “Start/
Stop” button to operate the machine, or set
the Width control to OFF in the Sewing
settings.
35, 73
All keys and buttons have been locked by
.
Press to unlock all keys and
buttons.
65, 67
Embroidery unit does
not operate
There is no pattern selected. Select a pattern. 190, 265
Main power switch is not turned on. Turn the main power to ON. 26
Embroidery unit is not attached correctly. Reattach the embroidery unit correctly. 188
Embroidery frame was attached before the unit
was initialized.
Perform the initialization process correctly. 188
Nothing happens,
even if the LCD
display is pressed
The screen has been locked. Press either of the following keys to unlock the
screen.
The fabric feeds in the
opposite direction.
The feed mechanism is damaged. Contact your dealer or the nearest authorized
service center.
The LCD screen is
fogged up.
Condensation has formed on the LCD screen. After a while, the cloudiness will disappear.
CAUTION
This machine is equipped with a thread detection device. If the “Start/Stop” button is pushed before the
upper threading is done, the machine will not operate properly. Also, depending on the pattern selected,
the machine may feed the fabric even if the needle is raised. This is due to the needle bar release
mechanism. At these times, the machine will make a sound different from what is made during normal
sewing. This is not the sign of a malfunction.
If the power is disconnected during sewing:
Turn the main power to OFF and unplug the machine.
If you restart the machine, follow the instructions for operating the machine correctly.
Problem Cause Solution Page
355


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 6750D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 6750D in the language / languages: English as an attachment in your email.

The manual is 20,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 6750D

Brother Innov-is 6750D Quick start guide - English - 92 pages

Brother Innov-is 6750D Additional guide - English - 28 pages

Brother Innov-is 6750D Quick start guide - German, Dutch, French - 92 pages

Brother Innov-is 6750D Additional guide - French - 28 pages

Brother Innov-is 6750D Quick start guide - Italian, Spanish - 92 pages

Brother Innov-is 6750D Additional guide - Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info