613558
15
Zoom out
Zoom in
Previous page
1/376
Next page
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
13
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
The names of the various parts of the sewing machine and their functions are described below. Before
using the sewing machine, carefully read these descriptions to learn the names of the machine parts.
Machine
Front View
a Top cover
Open the top cover to thread the machine and wind the bobbin.
b Pre-tension disk
Pass the thread around the pre-tension disk when winding the
bobbin thread. (page 48)
c Thread guide for bobbin winding
Pass the thread through this thread guide when winding the
bobbin thread. (page 48)
d Spool pin
Place a spool of thread on the spool pin. (page 57)
e Spool cap
Use the spool cap to hold the spool of thread in place. (page 57)
f Supplemental spool pin
Use this spool pin to wind the bobbin thread, or to sew with the
twin needle. (page 48, 60)
g Bobbin winder
Use the bobbin winder when winding the bobbin. (page 48)
h LCD (liquid crystal display)
Settings for the selected stitch and error messages appear in
the LCD. (page 28)
i Knee lifter
Use the knee lifter to raise and lower the presser foot. (page 83)
j Knee lifter slot
Insert the knee lifter into the slot. (page 83)
k Operation buttons (6 buttons) and sewing speed
controller
Use these buttons and the slide to operate the sewing machine.
(page 15)
l Flat bed attachment with accessory compartment
Store presser feet and bobbins in the accessory compartment
of the flat bed attachment. When sewing cylindrical pieces,
remove the flat bed attachment. (page 16)
m Thread cutter
Pass the threads through the thread cutter to cut them. (page
59)
n Thread guide plate
Pass the thread around the thread guide plate when threading
upper thread. (page 57)
Right-side/Rear View
a Handle
Carry the sewing machine by its handle when transporting the
machine.
b Presser foot lever
Raise and lower the presser foot lever to raise and lower the
presser foot. (page 65)
c Main power switch
Use the main power switch to turn the sewing machine ON and
OFF. (page 26)
d Foot controller with retractable cord
Depress the foot controller to control the speed of the machine.
(page 73)
e Power cord receptacle
Insert the power cord into the machine receptacle. (page 26)
f Air vent
The air vent allows the air surrounding the motor to circulate. Do
not cover the air vent while the sewing machine is being used.
g Foot controller jack
Insert the foot controller plug into its jack on the machine. (page
73)
h Speaker
i USB port for computer
In order to import/export patterns between a computer and the
machine, plug the USB cable into the USB port. (page 32, 179,
253)
j USB port for mouse (page 32)
k Primary (top) USB port for media
In order to send patterns from/to USB media, plug the USB
media directly into the USB port. (page 178, 252)
l Touch pen holder
Use the touch pen holder to hold the touch pen when not in use.
m Handwheel
Rotate the handwheel toward you (counterclockwise) to raise
and lower the needle. The wheel should be turned toward the
front of the machine.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 6700D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 6700D in the language / languages: English as an attachment in your email.

The manual is 24,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 6700D

Brother Innov-is 6700D Quick start guide - English, German, Dutch, French, Italian, Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info