613627
24
Zoom out
Zoom in
Previous page
1/252
Next page
LCD SCREEN
12
Using the Machine Setting Mode Key
Press to change the default machine settings (needle stop position, embroidery speed, opening
display, etc.) Press , or to display the different settings screens.
Sewing settings
a Select whether to use the sewing speed controller to determine the zigzag width (see page 70).
b Make adjustments to character or decorative stitch patterns (see page 103).
c Adjust the presser foot height. (Select the height of the presser foot when the presser foot is raised.)
d Adjust the presser foot pressure. (The higher the number, the higher the pressure will be. Set the pressure at 3 for
normal sewing.)
e Select whether “1-01 Straight stitch (Left)” or “1-03 Straight stitch (Middle)” is the utility stitch that is automatically
selected when the machine is turned on.
f Change the height of the presser foot when sewing is stopped when the pivot setting is selected (see page 53).
Adjust the presser foot to one of the three heights (3.2 mm, 5.0 mm and 7.5 mm).
g Change the height of the presser foot when the machine is set to free-motion sewing mode (see page 83).
h When set to “ON”, the thickness of the fabric is automatically detected by an internal sensor while sewing, so the
fabric can be fed smoothly (see pages 47 and 55).
i Adjust the character spacing on Character/Decorative stitch (see page 101).
Memo
This function will be available in future technology upgrades.
Press or to display a different settings screen.
a
b
c
d
e
f
g
h
i
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 5000 in the language / languages: English as an attachment in your email.

The manual is 8,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 5000

Brother Innov-is 5000 Quick start guide - English - 64 pages

Brother Innov-is 5000 Additional guide - English - 44 pages

Brother Innov-is 5000 Quick start guide - German - 64 pages

Brother Innov-is 5000 Additional guide - German - 44 pages

Brother Innov-is 5000 User Manual - German - 248 pages

Brother Innov-is 5000 Quick start guide - Dutch - 64 pages

Brother Innov-is 5000 Additional guide - Dutch - 44 pages

Brother Innov-is 5000 User Manual - Dutch - 248 pages

Brother Innov-is 5000 Quick start guide - French, Italian, Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info