613569
10
Zoom out
Zoom in
Previous page
1/116
Next page
8
Introduction
Thank you for choosing this product.
Before using this sewing machine, carefully read “Important Safety Instructions”, and then study this manual for
the correct operation of the various functions.
In addition, after you have finished reading this manual, store it where it can quickly be accessed for future
reference.
Names of Machine Parts and Their Functions
Machine
a Bobbin winder (page 15)
Use the bobbin winder when winding the bobbin.
b Spool pin (page 15, 20)
Place a spool of thread on the spool pin.
c Thread tension dial (page 49)
Use the thread tension dial to adjust the tension of the
upper thread.
d Bobbin-winding thread guide and pretension disc
(page 15)
Pass the thread under this thread guide and around the
pretension disc when winding the bobbin thread.
e Thread take-up lever (page 23)
Slide the thread into the thread take-up lever from the
right side of slot to the left side of slot.
f Thread cutter (page 48)
Pass the threads through the thread cutter to cut them.
g Flat bed attachment (page 10, 11, 39)
Store presser feet and bobbins in the flat bed
attachment. Remove the flat bed attachment when
sewing cylindrical pieces such as sleeve cuffs.
h Operation buttons and sewing speed controller
(page 10)
Use these buttons and the slide to operate the sewing
machine.
i Operation panel (page 10)
Use to select stitches and various other stitch settings.
j Pattern selection dial (page 42)
Use to select the pattern to sew.
k Handwheel
Turn the handwheel toward you to sew one stitch or to
raise or lower the needle.
l Main power switch (page 14)
Use this switch to turn the sewing machine on and off.
m Power supply jack (page 14)
Insert the plug on the power cord into the power supply
jack.
n Foot controller jack (page 45)
Insert the plug on the end of the foot controller cable
into the foot controller jack.
o Feed dog position switch (page 75)
Use this switch to lower the feed dogs.
p Presser foot lever (page 20)
Raise and lower this lever to raise and lower the presser
foot.
q Thread guide (page 16)
Pass the thread under this thread guide when winding
the bobbin thread and threading the machine.
r Thread guide cover (page 16)
Pass the thread under this thread guide when winding
the bobbin thread and threading the machine.
s Air vent
This vent allows the air surrounding the motor to
circulate.
t Handle
Carry the sewing machine by its handle when
transporting the machine.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 27SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 27SE in the language / languages: English as an attachment in your email.

The manual is 4,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 27SE

Brother Innov-is 27SE User Manual - German - 116 pages

Brother Innov-is 27SE User Manual - Dutch - 108 pages

Brother Innov-is 27SE User Manual - French - 108 pages

Brother Innov-is 27SE Quick start guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info