463620
104
Zoom out
Zoom in
Previous page
1/124
Next page
102
APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Troubleshooting
If the machine stops operating correctly, check the following possible problems before requesting service.
You can solve most problems by yourself. If you need additional help, the Brother Solutions Center offers the
latest FAQs and troubleshooting tips. Visit us at “ http://solutions.brother.com ” .
If the problem persists, contact your dealer or the nearest authorized service center.
Frequent troubleshooting topics
Detailed causes and remedies for common troubleshooting topics are described below. Be sure to refer to this
before contacting us.
Upper thread tightened up
Symptom
The upper thread appears as a single
continuous line.
The lower thread is visible from the upper
side of the fabric. (Refer to the illustration
below.)
The upper thread has tightened up, and
comes out when pulled.
The upper thread has tightened up, and
wrinkles appear in the fabric.
The upper thread tension is tight, and the
results do not change even after the thread
tension is adjusted.
1 Lower side of fabric
2 Lower thread visible from upper side of fabric
3 Upper thread
4 Upper side of fabric
5 Lower thread
Cause
Incorrect lower threading
If the lower thread is incorrectly threaded, instead
of the appropriate tension being applied to the
lower thread, it is pulled through the fabric when
the upper thread is pulled up. For this reason, the
thread is visible from the upper side of the fabric.
Remedy/check details
Correctly install the lower thread.
1
Turn off the sewing machine.
2
Remove the bobbin from the bobbin case.
3
Place the bobbin in the bobbin case so that
the thread unwinds in the correct direction.
Hold the bobbin with your right hand with
the thread unwinding to the left, and hold
the end of the thread with your left hand.
Then, with your right hand, place the bobbin
in the bobbin case.
If the bobbin is inserted with the thread
unwinding in the wrong direction, sewing will
be done with an incorrect thread tension.
Upper thread tightened up page 102
Tangled thread on wrong side of fabric page 103
Incorrect thread tension page 105
Fabric is caught in the machine and cannot be removed page 106
When the thread became tangled under the bobbin winder seat page 109
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 200 in the language / languages: English as an attachment in your email.

The manual is 4,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 200

Brother Innov-is 200 User Manual - German - 120 pages

Brother Innov-is 200 User Manual - Dutch - 110 pages

Brother Innov-is 200 User Manual - French - 110 pages

Brother Innov-is 200 Quick start guide - All languages - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info