463620
62
Zoom out
Zoom in
Previous page
1/124
Next page
60
UTILITY STITCHES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Sewing overcasting stitches using the optional side cutter
Using the side cutter, seam allowances can be finished while the edge of the fabric is cut off. The following four
stitches can be used to sew overcasting.
When the side cutter is attached, be sure to use the settings in the ranges listed below.
1
Remove the presser foot.
For details, refer to “Replacing the presser
foot” (page 33).
2
Lower the presser foot lever, and then
manually thread the needle.
The needle threader cannot be used. If the
needle threader is used with the side cutter,
the sewing machine may be damaged.
3
Raise the presser foot lever.
4
Hook the connecting fork of the side cutter
onto the needle clamp screw.
1 Connecting fork
2 Needle clamp screw
5
Position the side cutter so that side cutter pin
is aligned with the notch in the presser foot
holder, and then slowly lower the presser foot
lever.
1 Notch in presser foot holder
2 Pin
X The side cutter is attached.
Stitch Name Pattern Application
Stitch Width
[mm (inch)]
Stitch Length
[mm (inch)]
Presser
Foot
Auto Manual Auto Manual
Overcasting
stitch
00
Sewing straight stitches while
cutting the fabric
0.0
(0)
0.0–7.0
(0–1/4)
2.5
(3/32)
0.2–5.0
(1/64–3/16)
S
06
Preventing fraying in thin and
medium weight fabrics while
cutting the fabric
3.5
(1/8)
2.5–5.0
(3/32–3/16)
2.0
(1/16)
1.0–4.0
(1/16–3/16)
07
Preventing fraying in thick
fabrics while cutting the fabric
5.0
(3/16)
2.5–5.0
(3/32–3/16)
2.5
(3/32)
1.0–4.0
(1/16–3/16)
17
Sewing zigzag stitches while
cutting the fabric
3.5
(1/8)
0.0–7.0
(0–1/4)
1.4
(1/16)
0.0–4.0
(0–3/16)
b
a
b
a
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 200 in the language / languages: English as an attachment in your email.

The manual is 4,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 200

Brother Innov-is 200 User Manual - German - 120 pages

Brother Innov-is 200 User Manual - Dutch - 110 pages

Brother Innov-is 200 User Manual - French - 110 pages

Brother Innov-is 200 Quick start guide - All languages - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info