613419
176
Zoom out
Zoom in
Previous page
1/212
Next page
174
EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Adjusting the alternate bobbin case
(with no color on the screw)
When using the embroidery bobbin thread provided,
please be sure to choose the green marked bobbin
case when performing utility stitch sewing and
embroidery functions. When in the embroidery
function mode, the alternate bobbin case (with no
color on the screw) should be selected when
substitute embroidery bobbin threads (other than
what is accompanied with your machine) are being
used. The alternate bobbin case (with no color on the
screw) can be easily adjusted when bobbin tension
changes are required to accommodate different
bobbin threads. Refer to “Sewing attractive finishes
(page 166).
To adjust the bobbin tension for embroidery function,
using the alternate bobbin case (with no color on the
screw), turn the slotted screw (-) with a (small)
screwdriver.
a Do not turn a phillips screw (+).
b Adjust with a screwdriver (small).
Correct tension
Upper thread slightly appears on the wrong side
of fabric.
a Right side
b Wrong side
Bobbin thread is too loose
Bobbin thread appears slightly on the right side of
fabric.
a Right side
b Wrong side
If this occurs, turn the slotted screw (-) clockwise,
being careful not to over-tighten the screw,
approximately 30-45 degrees to increase bobbin
tension.
Bobbin thread is too tight
Upper thread on the right side of fabric seems to
be lifting/looping and bobbin thread is not seen
on the wrong side of fabric.
a Right side
b Wrong side
If this occurs, turn the slotted screw (-)
counterclockwise, being careful not to over-
loosen the screw, approximately 30-45 degrees to
decrease bobbin tension.
CAUTION
12
12
When adjusting the alternate bobbin case,
be sure to remove the bobbin from the
alternate bobbin case.
DO NOT adjust the position of the
phillips (+) screw on the alternate bobbin
case as this may result in damage to the
bobbin case, rendering it unusable.
If the slotted screw (-) is difficult to turn,
do not use force. Turning the screw too
much or providing force in either
(rotational) direction may cause damage
to the bobbin case. Should damage occur,
the bobbin case may not maintain proper
tension.
12
176


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 1250D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 1250D in the language / languages: English as an attachment in your email.

The manual is 8,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 1250D

Brother Innov-is 1250D Quick start guide - English, German, Dutch, French, Italian, Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info