613419
168
Zoom out
Zoom in
Previous page
1/212
Next page
166
EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Embroidering
After the preparations are done, you can try embroidering. This section describes the steps for
embroidering and appliquéing.
Sewing attractive finishes
There are many factors that go into sewing beautiful embroidery. Using the appropriate stabilizer (page 153) and
hooping the fabric in the frame (page 154) are two important factors mentioned earlier. Another important point
is the appropriateness of the needle and thread being used. See the explanation of threads below. Included with
this machine are two bobbin cases. Follow the explanation below.
z If you use threads other than those listed above, the embroidery may not sew out correctly.
For details on how to remove the bobbin case, refer to “Cleaning the race” (page 184).
For details on adjusting the alternate bobbin case, refer to “Adjusting the alternate bobbin case (with no color
on the screw)” (page 174).
z Before embroidering, check that there is enough thread in the bobbin. If you continue sewing without
enough thread in the bobbin, the thread may tangle.
z Do not leave objects in the range of motion of the embroidery frame. The frame may strike the object
and cause a poor finish to the embroidery pattern.
z When embroidering on large garments (especially jackets or other heavy fabrics), do not let the fabric
hang over the table. Otherwise, the embroidery unit cannot move freely, and the pattern may not turn
out as planned.
Thread
Upper thread
Use embroidery thread, or country embroidery thread intended for use with
this machine.
Other embroidery threads may not yield optimum results.
Bobbin thread Use embroidery bobbin thread intended for use with this machine.
Bobbin case
1 Standard bobbin case
(green marking on the
screw)
Alternate bobbin case
(no color on the screw)
Standard bobbin case (green marking on the screw) is in the machine for
sewing and embroidery. The bobbin case originally installed in the machine
has a green screw.
Alternate bobbin case (no color on the screw) is set with tighter tension for
embroidery with different weights of bobbin threads and a variety of
embroidery techniques. This bobbin case is identified with a dark colored
mark on the inside of the bobbin cavity. The screw on this case can be
adjusted if necessary.
a
168


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 1250D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 1250D in the language / languages: English as an attachment in your email.

The manual is 8,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 1250D

Brother Innov-is 1250D Quick start guide - English, German, Dutch, French, Italian, Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info