463627
53
Zoom out
Zoom in
Previous page
1/212
Next page
2
Sewing 51
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Selecting stitching
Stitches are selected using LCD operations. There are
71 utility stitches. Right after turning the power on,
the straight stitch (left needle position) is selected.
The machine can also be set to select the straight
stitch (center needle position). For details on
changing the setting, refer to page 21.
a
Determine the stitch to be used, and get the
matching presser foot ready.
Refer to “Stitch Setting Chart” (page 70).
b
Attach the presser foot.
The machine comes with zigzag foot “J”
attached.
For details, refer to “Replacing the presser
foot” (page 44).
CAUTION
c
Turn on the sewing machine.
X The straight stitch (left needle position) is
shown selected in the LCD.
When an animation is displayed on the
screen, touch the screen with your finger.
d
Select a stitch.
(Previous page key) displays the previous
screen, and (Next page key) displays the
next screen.
Example:
11
is selected:
X The stitch is selected, and the stitch number
and settings are displayed.
e
If necessary, specify the setting for automatic
reverse/reinforcement stitching and adjust the
stitch length, etc.
Memo
z
Uses of stitches and other stitch selections are
explained in
“UTILITY STITCHES” (page 69)
.
z Automatic reverse/reinforcement stitching
and other settings are explained in “Useful
Functions” (page 61).
z The procedures for specifying the thread
tension are described in “Adjusting the
thread tension” (page 59).
z Procedures for changing the stitch width and
length are described in “Adjusting the stitch
width” (page 58) and “Adjusting the stitch
length” (page 59).
Note
z When a stitch is selected, the icon for the
presser foot that should be used appears on
the screen. For details, refer to “Replacing
the presser foot” (page 44). Check that the
correct presser foot is attached before
starting to sew. If the wrong presser foot is
installed, turn off the sewing machine, attach
the correct presser foot, and then select the
desired stitch again.
Use the presser foot appropriate for the
stitch. If the wrong presser foot is used,
the needle may hit the presser foot and
break or bend.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 1250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 1250 in the language / languages: English as an attachment in your email.

The manual is 8,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 1250

Brother Innov-is 1250 Quick start guide - English, German - 28 pages

Brother Innov-is 1250 User Manual - German - 216 pages

Brother Innov-is 1250 Quick start guide - Dutch - 28 pages

Brother Innov-is 1250 User Manual - Dutch - 208 pages

Brother Innov-is 1250 User Manual - French - 208 pages

Brother Innov-is 1250 Quick start guide - French, Italian, Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info