463612
94
Zoom out
Zoom in
Previous page
1/104
Next page
APPENDIX
92
List of symptoms
Symptom Probable Cause Remedy Reference
The sewing
machine does
not operate.
The plug of the power cord is not
inserted into an electrical outlet.
Insert the plug of the power cord into
a household electrical outlet.
page 14
The machine is not turned on. Turn on the machine. page 14
The bobbin winder shaft is moved to
the right.
Slide the bobbin winder shaft to the
left.
page 17
The presser foot lever is raised. Lower the presser foot lever. page 42
A stitch other than the buttonhole or
bar tack stitch was selected and the
start/stop button was pressed while
the buttonhole lever is lowered.
Raise the buttonhole lever.
The buttonhole or bar tack stitch was
selected and the start/stop button was
pressed while the buttonhole lever is
raised.
Pull down the buttonhole lever. page 58
The start/stop button was pressed,
even though the foot controller is
connected.
Do not use the start/stop button when
the foot controller is connected. To
use the start/stop button, disconnect
the foot controller.
page 42
The needle
breaks.
The needle is incorrectly installed. Correctly install the needle. page 29
The needle clamp screw is loose.
Use the screwdriver to firmly tighten
the screw.
page 30
The needle is bent or blunt. Replace the needle with a new one. page 29
The combination of fabric, thread and
needle is incorrect.
Select a thread and needle that are
appropriate for the type of fabric
being sewn.
page 28
The presser foot appropriate for the
type of stitch that you wish to sew is
not used.
Attach the presser foot that is
appropriate for the type of stitch that
you wish to sew.
page 79
The upper thread tension is too tight. Loosen the upper thread tension. page 47
The fabric is pulled too much. Lightly guide the fabric.
The area around the hole in the
needle plate is scratched.
Replace the needle plate.
Contact your dealer or the nearest
authorized service center.
The area around the hole in the
presser foot is scratched.
Replace the presser foot.
Contact your dealer or the nearest
authorized service center.
The bobbin case is scratched.
Replace the bobbin case.
Contact your dealer or the nearest
authorized service center.
A bobbin designed specifically for
this machine is not used.
Bobbins from older models, which
have a different thickness, will not
work properly. Only use a bobbin
designed specifically for this
machine.
page 15
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 10 in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 10

Brother Innov-is 10 User Manual - German - 104 pages

Brother Innov-is 10 User Manual - Dutch - 92 pages

Brother Innov-is 10 User Manual - French - 96 pages

Brother Innov-is 10 Quick start guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info