463612
77
Zoom out
Zoom in
Previous page
1/104
Next page
75
3
Using the side cutter (optional)
By using the optional side cutter, overcasting stitching can be sewn while the edge of the fabric is cut off.
The values below “Auto” are set when the pattern is selected. The setting can be adjusted to any value within the range
indicated below “Manual”. When using the side cutter, adjust the stitch width setting to a value within the range indicated in
the table above.
a
Remove the presser foot.
For details, refer to “Replacing the presser
foot” (page 31).
b
Thread the upper thread.
For details, refer to “Threading the upper
thread” (page 20).
Note
The needle threader cannot be used while
the side cutter is installed on the sewing
machine, otherwise damage to the needle
threader may result.
c
Select a stitch.
For details, refer to “Selecting a stitch”
(page 40).
d
Raise the presser foot lever.
e
Raise the presser foot lever even higher, and
then hook the connecting fork of the side
cutter onto the needle clamp screw.
a Connecting fork
b Needle clamp screw
Stitch Name
Pattern
Presser Foot
Application
Stitch Width
[mm (inch)]
Stitch Length
[mm (inch)]
Reverse/
Reinforcement
Stitching
Auto Manual Auto Manual
Overcasting
stitch
S
Basic stitching,
sewing gathers or
pintucks, etc.
0.0
(0)
0.0–2.5
(0–3/32)
2.5
(3/32)
0.2–5.0
(1/64–3/16)
Reverse
S
Overcasting on
thin or medium
weight fabrics
3.5
(1/8)
2.5–5.0
(3/32–3/16)
2.0
(1/16)
1.0–4.0
(1/16–3/16)
Reinforcement
S
Overcasting on
thick fabrics
5.0
(3/16)
2.5–5.0
(3/32–3/16)
2.5
(3/32)
1.0–4.0
(1/16–3/16)
Reinforcement
Before replacing the presser foot and presser foot holder, be sure to turn off the sewing machine,
otherwise injuries may occur if a button is accidentally pressed and the machine starts sewing.
CAUTION
b
a
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 10 in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 10

Brother Innov-is 10 User Manual - German - 104 pages

Brother Innov-is 10 User Manual - Dutch - 92 pages

Brother Innov-is 10 User Manual - French - 96 pages

Brother Innov-is 10 Quick start guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info