463612
56
Zoom out
Zoom in
Previous page
1/104
Next page
UTILITY STITCHES ——————————————————————————————————————————————————————————————————
——
54
Blind Hem Stitching
The bottoms of skirts and pants are hemmed. Two stitches are available for blind hem stitching.
The values below “Auto” are set when the pattern is selected. The setting can be adjusted to any value within the range
indicated below “Manual”.
Memo
When stitch or is selected
Press the “–” side of the stitch width key so that “0”, “-1”, “-2” or “-3” appears in the LCD to move the
needle drop point to the left.
Press the “+” side of the stitch width key so that “0”, “1”, “2” or “3” appears in the LCD to move the
needle drop point to the right.
Sew a blind hem according to the following procedure.
a
Fold the fabric along the desired edge of the
hem, and then baste it about 5 mm (3/16
inch) from the edge of the fabric. After
basting, fold back the fabric along the basting,
and then position the fabric with the wrong
side facing up.
a Wrong side of fabric
b Basting stitching
c Desired edge of hem
d 5 mm (3/16 inch)
e Edge of hem
b
Turn on the machine.
c
With the pattern selection dial,
select or .
d
Attach blind hem foot “R”.
For details, refer to “Replacing the presser
foot” (page 31).
Stitch Name
Pattern
Presser Foot
Application
Stitch Width
[mm (inch)]
Stitch Length
[mm (inch)]
Twin Needle
Walk-
ing
Foot
Reverse/
Reinforcement
Stitching
Auto Manual Auto Manual
Blind hem stitch
R
Blind hem stitching
on medium weight
fabrics
0
(0)
–3 – 3
2.0
(1/16)
1.0–3.5
(1/16–1/8)
No No Reinforcement
R
Blind hem stitching
on stretch fabrics
0
(0)
–3 – 3
2.0
(1/16)
1.0–3.5
(1/16–1/8)
No No Reinforcement
Before replacing the presser foot, be sure to turn off the sewing machine, otherwise injuries may occur if a
button is accidentally pressed and the machine starts sewing.
CAUTION
a
b
d
c
a
b
d
e
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 10 in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 10

Brother Innov-is 10 User Manual - German - 104 pages

Brother Innov-is 10 User Manual - Dutch - 92 pages

Brother Innov-is 10 User Manual - French - 96 pages

Brother Innov-is 10 Quick start guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info