463612
49
Zoom out
Zoom in
Previous page
1/104
Next page
47
2
e
After reaching the end of the stitching, press
the reverse/reinforcement stitch button once.
a Reverse/reinforcement stitch button
This step is not necessary if a stitch such as
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
X After reverse/reinforcement stitches are
sewn, the sewing machine stops.
Memo
Reverse/reinforcement stitches WILL NOT
be sewn until (reverse/reinforcement
stitch button) is pressed. (start/stop
button) may be pressed to stop stitching
when needed such as for pivoting corners.
Adjusting the thread tension
The tensions of the upper thread and of the bobbin
thread (thread tension) should be adjusted so that
they are equal.
If the preset thread tension does not give the desired
result or if you are sewing with special thread or on
special fabric, use the thread tension dial to increase
or decrease the tension of the upper thread.
Note
If the upper thread is not threaded correctly
or the bobbin is not installed correctly, it
may not be possible to set the correct thread
tension. If the correct thread tension cannot
be achieved, rethread the upper thread and
insert the bobbin correctly.
Memo
We recommend that you do a test sample
on scrap of a fabric before you start to sew.
Correct thread tension
The upper thread and the bobbin thread should cross near
the center of the fabric. Only the upper thread should be
visible from the right side of the fabric, and only the bobbin
thread should be visible from the wrong side of the fabric.
Upper thread is too tight
If the bobbin thread is visible from the right side
of the fabric, the upper thread is too tight.
Note
If the bobbin thread was incorrectly
threaded, the upper thread may be too tight.
In this case, refer to “Installing the bobbin”
(page 18) and rethread the bobbin thread.
Turn the thread tension dial to the left to
loosen the upper thread.
Upper thread is too loose
If the upper thread is visible from the wrong side
of the fabric, the upper thread is too loose.
Note
If the upper thread was incorrectly threaded,
the upper thread may be too loose. In this
case, refer to “Threading the upper thread
(page 20) and rethread the upper thread.
Turn the thread tension dial to the right to
tighten the upper thread.
a
b
c
d
a Wrong side of fabric
b Right side of fabric
c Upper thread
d Bobbin thread
a
b
c
e
d
a Wrong side of fabric
b Right side of fabric
c Upper thread
d Bobbin thread
e The bobbin thread is
visible from the right
side of the fabric.
a
b
c
e
d
a Wrong side of fabric
b Right side of fabric
c Upper thread
d Bobbin thread
e
The upper thread is
visible from the wrong
side of the fabric.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 10 in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 10

Brother Innov-is 10 User Manual - German - 104 pages

Brother Innov-is 10 User Manual - Dutch - 92 pages

Brother Innov-is 10 User Manual - French - 96 pages

Brother Innov-is 10 Quick start guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info