681724
46
Zoom out
Zoom in
Previous page
1/79
Next page
General Information
39
3
Data Remaining
There is print data remaining in the machine's memory. If the Ready LED ( ) is blinking for a long time
and nothing has printed, press to print the data remaining in the memory.
The Ready LED ( ) will blink at 0.5 second intervals.
Toner Low
The toner cartridge will need to be replaced soon. Buy a new Brother toner cartridge and have it ready
for when Replace Toner is indicated.
Both the Ready () and Error () LEDs will turn on together, then the Error LED () will turn off
after 0.5 seconds and the
Ready LED () will turn off after 1 second, they will then both be off
for a further 1 second. This procedure is repeated until the error is corrected.
If the printout is faint, hold the drum unit and toner cartridge assembly level with both hands and gently
shake it from side to side several times to spread the toner evenly inside the cartridge.
Replace Toner (Continue mode)
The machine continues printing until the LED indicates Toner Ended.
Both the Ready () and Error () LEDs will turn on together, then the Error LED () will turn off
after 0.5 seconds and the
Ready LED () will turn off after 1 second, they will then both be off
for a further 1 second. This procedure is repeated until the error is corrected.
For details about Continue mode, see Toner Setting on page 48.
Replace Toner (Stop mode)
Replace the toner cartridge with a new one.
The Error LED ( ) will blink once at 1.5 seconds intervals.
For details about Stop mode, see Toner Setting on page 48.
(See the instructions printed on the box of the new Brother toner cartridge.)
No Toner
Remove the drum unit and toner cartridge assembly, remove the toner cartridge from the drum unit, and
reinstall the toner cartridge back into the drum unit again. Reinstall the drum unit and toner cartridge
assembly back in the machine. If the problem continues, replace the toner cartridge.
The Error LED ( ) will blink once at 1.5 seconds intervals.
(See the instructions printed on the box of the new Brother toner cartridge.)
Toner Ended
Replace the toner cartridge with a new one.
The Error LED ( ) will blink once at 1.5 seconds intervals.
(See the instructions printed on the box of the new Brother toner cartridge.)
Cartridge Error
The drum unit and toner cartridge assembly is not installed correctly. Take the drum unit and toner
cartridge assembly out of the machine and put it back in. Use only a Brother Original drum unit and
Brother Original toner cartridge.
The Error LED ( ) will blink 4 times and turn off for 1 second.
LEDs Machine Status
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother HL1212W-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother HL1212W-E in the language / languages: English as an attachment in your email.

The manual is 9,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother HL1212W-E

Brother HL1212W-E Installation Guide - English - 2 pages

Brother HL1212W-E Installation Guide - German - 2 pages

Brother HL1212W-E User Manual - German - 83 pages

Brother HL1212W-E Installation Guide - Dutch - 2 pages

Brother HL1212W-E User Manual - Dutch - 83 pages

Brother HL1212W-E Installation Guide - French - 2 pages

Brother HL1212W-E User Manual - French - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info