681747
398
Zoom out
Zoom in
Previous page
1/402
Next page
Home > Appendix > Important Information About Toner Cartridge Life
Important Information About Toner Cartridge Life
Toner Cartridge Life
This product detects the life of the toner cartridges using the following two methods:
Detection by counting the dots of each colour that are necessary to create an image
Detection by counting the rotations of the developer roller
This product has a function that will count the dots of each colour used to print every document and the rotations
of each toner cartridge’s developer roller. The print operation will stop when either of the upper limits is reached.
The upper limit is set above the number of dots or rotations that would be required for the cartridge to perform
consistently with its advertised page yield. This function is intended to reduce the risk of poor print quality and
damage to the machine.
There are two messages that indicate when the toner is low or needs replacing: Toner Low and Replace Toner.
Toner Low is displayed on the LCD when the number of dots or rotations of the developer roller nears its
maximum count: Replace Toner is displayed on the LCD when the number of dots or rotations of the developer
roller reaches its maximum count.
Colour Correction
The number of developer roller rotations that are counted may not only be for normal operations, such as printing
and copying, but also for machine adjustments, such as Colour Calibration and Colour Registration.
Colour Calibration (Adjustment of Colour Density)
To obtain stable print quality, the density of each toner cartridge needs to be maintained at a fixed value. If the
density balance between the colours cannot be kept, the tint becomes unstable, and accurate colour
reproduction becomes unavailable. The toner density can change due to chemical changes to the toner that
affect its electrical charge, deterioration of the developer unit, and temperature and humidity levels in the
machine. During calibration, the density level adjustment test patterns are printed on the belt unit.
Calibration is mainly performed at the following times:
When the user manually selects calibration from the operation panel or the printer driver.
(Please perform calibration if colour density needs to be improved.)
When a used toner cartridge is replaced with a new one.
When the machine detects that the ambient temperature and humidity have changed.
When a specified number of printed pages is reached.
Colour Registration (Correction of Colour Position)
In this machine, the drum unit and developer unit are prepared for black (K), yellow (Y), magenta (M), and cyan
(C), respectively. Four colour images are combined into one image, and therefore colour registration errors (for
example, how the four colour images align) might occur. When registration errors occur, registration correction
test patterns are printed on the belt unit.
Registration is mainly performed at the following times:
When the user manually selects registration from the operation panel.
(Please perform registration if a colour registration error needs to be corrected.)
When a specified number of printed pages is reached.
Related Information
Appendix
393
398


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother HL-L9310CDW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother HL-L9310CDW in the language / languages: English as an attachment in your email.

The manual is 6,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother HL-L9310CDW

Brother HL-L9310CDW Installation Guide - English - 2 pages

Brother HL-L9310CDW Quick start guide - English - 19 pages

Brother HL-L9310CDW Installation Guide - German - 2 pages

Brother HL-L9310CDW Quick start guide - German - 21 pages

Brother HL-L9310CDW User Manual - German - 419 pages

Brother HL-L9310CDW Installation Guide - Dutch - 2 pages

Brother HL-L9310CDW Quick start guide - Dutch - 19 pages

Brother HL-L9310CDW User Manual - Dutch - 411 pages

Brother HL-L9310CDW Installation Guide - French - 2 pages

Brother HL-L9310CDW Quick start guide - French - 21 pages

Brother HL-L9310CDW User Manual - French - 414 pages

Brother HL-L9310CDW Additional guide - All languages - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info