579789
185
Zoom out
Zoom in
Previous page
1/227
Next page
Troubleshooting
176
6
Error and maintenance messages 6
As with any sophisticated office product, errors may occur and supplies must be replaced. If this happens,
your machine identifies the error or required routine maintenance and displays the appropriate message. The
most common error and maintenance messages are shown below.
You can clear most errors and perform routine maintenance yourself. If you need more help, the Brother
Solutions Center offers the latest FAQs and troubleshooting tips:
Visit http://solutions.brother.com/
.
Using non-Brother supplies is not recommended and may affect the print quality, hardware performance, and
machine reliability.
NOTE
The Touchscreen displays the tray names as follows.
Standard paper tray: Tray1
Multi-purpose tray: MP Tray
Optional lower tray
1
: Tray2 and T2
1
Standard equipment.
Error message Cause Action
2-sided Disabled The back cover of the machine is
not closed completely.
Close the back cover of the machine.
Access Denied The operation you want to use is
restricted by Secure Function Lock.
Contact your administrator to check your Secure
Function Lock settings.
Access Error The device was removed from the
USB direct interface while data was
processing.
Press .Reinsert the device and try to print with
Direct Print.
Belt End Soon The belt unit is near the end of its
life.
Buy a new belt unit before you get a Replace Belt
message.
Calibration Calibration failed.
Press and hold down to turn the machine off.
Wait a few seconds, and then turn it on again.
Perform the colour calibration again using the
Touchscreen or the printer driver (see Colour
Calibration on page 48).
Install a new belt unit (see Replacing the belt unit
on page 140).
If the problem continues, contact Brother
customer service or your local Brother dealer.
Cartridge Error The toner cartridge is not installed
correctly.
Pull out the drum unit, remove the toner cartridge for
the colour that is indicated on the Touchscreen, and
put it back into the drum unit again. Install the drum
unit in the machine again. If the problem continues,
contact Brother customer service or your local
Brother dealer.
185


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother HL-L9300CDWTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother HL-L9300CDWTT in the language / languages: English as an attachment in your email.

The manual is 17,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother HL-L9300CDWTT

Brother HL-L9300CDWTT User Manual - German - 232 pages

Brother HL-L9300CDWTT User Manual - Dutch - 232 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info