579782

Brother HL-L8350CDW Manual

217
Zoom out
Zoom in
Previous page
1/221
Next page
Appendix
210
A
Important information for the toner cartridge life A
Colour/Mono setting in the printer driver A
Users can change the Colour/Mono settings on the printer driver as follows:
Auto
The machine checks the content of the document for colour. If colour is detected anywhere in the
document, it will print the whole of the document using all the colours. In other words, it will mix some of
the toners to help achieve every shade detected in the document, increasing the density of toner applied
to the page. If no colour content is detected, it will print the document in monochrome.
The default setting on your machine is Auto.
NOTE
The machine’s colour sensor is very sensitive and may perceive faded black text or an off-white
background as colour. If you know that your document is black and white and you want to conserve colour
toner, select Mono mode.
Colour
Whether the document contains colour or just monochrome, your machine will print the document using
all the colours.
Mono
Select this mode if the document has only black and greyscale text and/or objects. If your document
contains colour, this mode prints the document in 256 levels of grey using the black toner.
NOTE
If either the Cyan, Magenta or Yellow toner reaches the end of its life while printing a colour document, the
print job cannot be completed. You can cancel your print job and choose to start the print job again in
Mono mode, as long as Black toner is available.
For more information about the settings in the printer driver, see Chapter 2: Driver and Software.
Toner Cartridge Life
A
This product detects the life of the toner cartridges using the following two methods:
Detection by counting the dots of each colour that are necessary to create an image
Detection by counting the rotations of the developer roller
This product has a function that will count the dots of each colour used to print every document and the
rotations of each toner cartridge’s developer roller. The print operation will stop when either one of the
upper limits are reached. The upper limit is set above the number of dots or rotations that would be
required for the cartridge to perform consistently with its advertised page yield. This function is intended
to reduce the risk of poor print quality and damage to the machine.
There are two messages that indicate when the toner nears or reaches its life end: Toner Low and
Replace Toner.
… 217 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother HL-L8350CDW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother HL-L8350CDW in the language / languages: English as an attachment in your email.

The manual is 14,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother HL-L8350CDW

Brother HL-L8350CDW User Manual - German - 227 pages

Brother HL-L8350CDW User Manual - Dutch - 223 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info