Visitwww.brother.com/original for instructions on how to return your used supplies to the Brother collection program. If you choose not to return used supplies, please
discard them according to local regulations, keeping them separate from domestic waste. If you have questions, call your local waste disposal ofce.
In USA, go to www.brother-usa.com/Environment/TonerInkDisposal.aspx.
In Canada, go to www.brother.ca/en-CA/environment/cartridgecollectionprogram.
[ English ]RESET THE DRUM UNIT COUNTER
Make sure the machine is turned on.
LED Models
(1) Make sure that the front cover is open.
(2) Press and hold Go for about four seconds until all of the LEDs
light up. When all four LEDs are lit, release Go.
(3) Close the front cover.
(4) Make sure the Drum LED is now off.
1-line LCD Models
(1) Close the front cover.
(2) Press OK and a at the same time.
(3) Press OK to select Drum.
(4)
Press
b
to reset the drum counter.
2-Line LCD Models
(1) Close the front cover.
(2) Press OK and a at the same time.
(3) Press OK to select Drum.
(4)
Press
a
to reset the drum counter.
Touchscreen Models
(1) Close the front cover.
(2) Press
.
(3) Press and hold
for ve seconds.
(4) Press Drum, and then press Yes.
5
Unter www.brother.com/original nden Sie Anweisungen, wie Sie die Verbrauchsmaterialien im Rahmen des Brother Recyclingprogramms zurücksenden können. Wenn
Sie sich gegen die Rücksendung der Verbrauchsmaterialien entscheiden, entsorgen Sie die Verbrauchsmaterialien gemäß den örtlichen Bestimmungen getrennt vom
normalen Hausmüll. Wenn Sie Fragen haben, wenden Sie sich an Ihren örtlichen Wertstoffhof.
[ Deutsch ]Setzen Sie den ZÄHLER DER TROMMELEINHEIT zurück
Stellen Sie sicher, dass das Gerät eingeschaltet ist.
LED-Modelle
(1) Stellen Sie sicher, dass die vordere Abdeckung geöffnet ist.
(2) Halten Sie Go (Los) ca. vier Sekunden lang gedrückt, bis alle
LEDs aueuchten. Wenn alle vier LEDs leuchten, lassen Sie
Go (Los) wieder los.
(3) Schließen Sie die vordere Abdeckung.
(4) Stellen Sie sicher, dass die Drum (Trommel)-LED nun aus ist.
1-zeilige LCD-Modelle
(1) Schließen Sie die vordere Abdeckung.
(2) Drücken Sie gleichzeitig OK und a.
(3) Drücken Sie OK, um Trommel auszuwählen.
(4) Drücken Sie b, um den Trommelzähler zurückzusetzen.
2-zeilige LCD-Modelle
(1) Schließen Sie die vordere Abdeckung.
(2) Drücken Sie gleichzeitig OK und a.
(3) Drücken Sie OK, um Trommel auszuwählen.
(4) Drücken Sie a, um den Trommelzähler zurückzusetzen.
Touchscreen-Modelle
(1) Schließen Sie die vordere Abdeckung.
(2) Drücken Sie
.
(3) Halten Sie
fünf Sekunden lang gedrückt.
(4) Drücken Sie Trommel, und drücken Sie dann Ja.
5
Voir www.brother.com/original pour savoir comment retourner vos consommables usagés dans le cadre du programme de collecte Brother. Si vous ne renvoyez pas votre
consommable, mettez-le au rebut conformément aux réglementations locales en vigueur, en le séparant des ordures ménagères. Si vous avez des questions, appelez les
autorités locales compétentes en la matière.
Au Canada, visitez www.brother.ca/fr-CA/environment/cartridgecollectionprogram.
[ Français ]RÉINITIALISEZ LE COMPTEUR DU TAMBOUR
Assurez-vous que l’appareil est sous tension.
Modèles à DEL
(1) Assurez-vous que le capot avant est ouvert.
(2)
Appuyez sur la touche Go (Démarrer) et maintenez-la enfoncée
pendant environ 4 secondes jusqu’à ce que les DEL s’allument.
Une fois les 4 DEL allumées, relâchez la touche Go (Démarrer).
(3) Fermez le capot avant.
(4) Assurez-vous que la DEL Drum (Tambour) est maintenant
éteinte.
Modèles à écran LCD 1 ligne
(1) Fermez le capot avant.
(2) Appuyez simultanément sur OK et a.
(3) Appuyez sur OK pour sélectionner Tambour.
(4) Appuyez sur b pour réinitialiser le compteur du tambour.
Modèles à écran LCD 2 lignes
(1) Fermez le capot avant.
(2) Appuyez simultanément sur OK et a.
(3) Appuyez sur OK pour sélectionner Tambour.
(4) Appuyez sur a pour réinitialiser le compteur du tambour.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Brother HL-L2335D at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Brother HL-L2335D in the language / languages: All languages as an attachment in your email.
The manual is 1,09 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
