1883
100
Zoom out
Zoom in
Previous page
1/152
Next page
7. Troubleshooting
92
LCD messages
If any problems occur, the printer automatically stops printing, diagnoses the problem, and displays the
resulting message on the LCD to alert you. Use the table below to identify and clear the error message. If you
cannot clear the problem, call the dealer you bought the printer from or Brother Customer Service.
Note
The LCD names for the paper trays are as follows.
Standard paper tray: TRAY1
Multi-purpose tray: MP
Optional Lower tray: TRAY2 or TRAY3
Error message
Error message Action
BUFFER ERROR Check the Interface settings.
CARTRIDGE ERROR Take out the drum unit assembly and put it back into the printer again.
DIMM ERROR Re-install the DIMM correctly.Turn off the printer. Wait a few seconds, and then turn it on
again. If this error message appears again, replace the DIMM with a new one.
DOWNLOAD FULL Add more memory. See Installing extra memory on page 71.
DUPLEX DISABLED Close the back cover of the printer and put the duplex tray back in.
DUST ON DRUM Open the front cover. Take out the drum unit and toner cartridge assembly. Gently slide the
blue tab of the drum unit across several times.
FONT FULL Add more memory. See Installing extra memory on page 71.
FRONT COVER OPEN Close the front cover of the printer.
FUSER COVER OPEN Close the fuser cover located behind the back cover of the printer.
JAM XXX Carefully pull out the jammed paper from the area shown in Paper jams and how to clear
them on page 96.
MANUAL FEED Put the same size of paper in the MP tray as is shown on the LCD. If the printer is 'paused',
press Go.
MEMORY FULL Add more memory. See Installing extra memory on page 71 and Solving print problems on
page 111.
NO PAPER Put paper in the empty tray. If the error was not cleared when you put paper in the tray,
match the size of the paper that you selected in the application with the TRAY SIZE or set
the TRAY SIZE to ANY using the control panel.
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother HL-5270DN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother HL-5270DN in the language / languages: English as an attachment in your email.

The manual is 5,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother HL-5270DN

Brother HL-5270DN User Manual - German - 154 pages

Brother HL-5270DN User Manual - Dutch - 152 pages

Brother HL-5270DN User Manual - French - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info