579722
171
Zoom out
Zoom in
Previous page
1/199
Next page
Troubleshooting
166
6
Solving print problems 6
Network problems 6
For problems concerning using your machine on a Network, see the Network User's Guide.
The latest Network User's Guide in PDF format is available by accessing the Brother Solutions Center
(http://solutions.brother.com/
).
Problem Recommendation
The machine will not turn on. Adverse conditions on the power connection (such as lightning or a power surge)
may have triggered the machine's internal safety mechanisms. Turn the machine
off and unplug the power cord. Wait for ten minutes, then plug in the power cord
and turn the machine on.
If there is still no power, connect the machine to a different AC power outlet.
The machine prints
unexpectedly or it prints
garbage data.
Make sure that the machine cable is not too long. We recommend that you use a
USB cable that is no longer than 2 meters (6.5 feet).
Make sure that the machine cable is not damaged or broken.
If you are using an interface-switching device, remove it. Connect your computer
directly to your machine, and then try again.
Make sure that you have chosen the correct printer driver with ‘Set as Default
Printer’.
Make sure that the machine is not connected to the same port that is also
connected to a storage device or scanner. Take away all other devices and
connect the port only to the machine.
Turn off Status Monitor.
The machine cannot print full
pages of a document. An error
message Out of Memory
appears.
Press Go to print the remaining data in the machine memory. Cancel the print job
if you want to delete the remaining data in the machine memory. (See Buttons
on page 64.)
Reduce the complexity of your document or select a lower print resolution.
Add more memory. (See Installing extra memory on page 87.)
The headers or footers appear
when the document displays on
the screen but they do not show
up when it is printed.
Adjust the top and bottom margins of your document.
The machine does not change
to Direct Print mode when a
USB flash memory drive is
connected to the USB direct
interface.
When the machine is in Deep Sleep mode, the machine does not wake up when a
USB flash memory drive is connected to the USB direct interface. Press Go to wake
up the machine to display the Direct Print menu on the LCD.
171


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother HL-4570CDWT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother HL-4570CDWT in the language / languages: English as an attachment in your email.

The manual is 9,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother HL-4570CDWT

Brother HL-4570CDWT User Manual - German - 205 pages

Brother HL-4570CDWT User Manual - Dutch - 206 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info