48651
88
Zoom out
Zoom in
Previous page
1/166
Next page
4 - 15 CONTROL PANEL
NetWare (default: Enabled)
Set NetWare to 'Enabled' to print in a NetWare system or to 'Disabled' if you do not want to use
this feature.
AppleTalk (default: Enabled)
Set AppleTalk to 'Enabled' to print in an AppleTalk system or to 'Disabled' if you do not want to
use this feature.
IP Filter
Use IP Filter to block the reception of data from certain locations.
To block a particular IP address, specify the IP address in 'FilterX Address' (X is a number between 1
and 5) and the subnet mask in 'FilterX Mask' as numbers between 0 and 255. For the set address, select
'OFF' (default), 'Reject', or 'Accept' from 'FilterX Mode'.
You can filter up to 5 addresses. Filter1 takes priority over the other filters. Therefore, when setting filters
for a number of addresses, assign the addresses in ascending ranges from Filter1 to Filter5.
You can also set IP filter settings by connecting to the printer using a web browser. For a detailed
examples of these settings, see the Network User's Guide on the CD-ROM we provided.
For more information about Web Based Management, consulte Confirming Printer Status from Your
Computer en la página 7-21.
Init NVM
This resets the non-volatile memory of the printer’s network card (also known as a print server).
You cannot change this setting while the printer is processing print data.
YES
Resets the network card's NV memory. Resetting the NV memory restores the items of the '5
Network' menu to their defaults.
You must restart the printer for this setting to take effect. After programming settings, be sure to restart
the printer.
NO
Does not reset the NV memory and returns to the menu.
Adobe Protocol
To set the Adobe Protocol choose one of the following:
Auto (default)
Standard
BCP
TBCP
RAW
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother HL-4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother HL-4200 in the language / languages: English as an attachment in your email.

The manual is 3,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother HL-4200

Brother HL-4200 User Manual - German - 161 pages

Brother HL-4200 User Manual - Dutch - 165 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info