579720
147
Zoom out
Zoom in
Previous page
1/199
Next page
Troubleshooting
142
6
DIMM Error The DIMM is not installed
correctly.
The DIMM is broken.
The DIMM does not meet the
required specifications.
Turn off the machine and remove the DIMM.
Confirm the DIMM meets the required
specifications. (For details, see SO-DIMM types
on page 86.)
Re-install the DIMM correctly. Wait a few seconds,
and then turn it on again.
If this error message appears again, replace the
DIMM with a new one. (See Installing extra
memory on page 87.)
Drum Error The corona wire on the drum unit
needs to be cleaned.
Clean the corona wires. (See Cleaning the corona
wires on page 121.)
Duplex Disabled
<The second line of the
LCD>
Close the Back
Cover of the
machine.
(HL-4150CDN/
HL-4570CDW(T) only)
The back cover of the machine is
not closed completely.
Close the back cover of the machine.
Duplex Disabled
<The second line of the
LCD>
Load XX paper and
press Go.
(HL-4150CDN/
HL-4570CDW(T) only)
Although the size of paper in the
paper tray matches the paper size
that was selected from the control
panel or printer driver, the machine
has stopped printing when it
encountered an additional, different
size of paper in the tray. The LCD is
telling you to load only the selected
paper size.
Make sure the paper tray contains only the size of
paper you select in either the control panel or printer
driver, then press Go.
The paper tray was pulled out
before the machine completed
printing on both sides of the paper.
Re-install the paper tray and press Go.
Fuser Error The temperature of the fuser unit
does not rise to a specified
temperature within the specified
time.
Turn the power switch off, wait a few seconds and
then turn it on again. Leave the machine for 15
minutes with the power on.
The fuser unit is too hot.
Jam XXX The paper is jammed in the area
shown on the LCD.
Carefully pull out the jammed paper from the area
shown in Paper jams and how to clear them
on page 146.
Low Temperature The room temperature is too low for
the machine to operate.
Increase the room temperature to allow the machine
to operate.
No Belt Unit The belt unit is not installed
correctly.
Re-install the belt unit. (See Belt unit on page 106.)
Error messages (continued)
Error message Cause Action
147


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother HL-4150CDN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother HL-4150CDN in the language / languages: English as an attachment in your email.

The manual is 9,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother HL-4150CDN

Brother HL-4150CDN User Manual - German - 205 pages

Brother HL-4150CDN User Manual - Dutch - 206 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info