1-12
• Do not place the printer where it is exposed to direct sunlight. Use a blind
or a heavy curtain to protect the printer from direct sunlight if the printer
is unavoidably set up near a window.
• Do not install the printer near other electronic equipment.
• Do not subject the printer to strong physical shocks or vibrations. Do not
expose the printer to open flames or salty or corrosive gasses.
• Keep the printer clean. Do not install the printer in a dusty place.
• Do not install the printer near an air conditioner or humidifier.
• Confirm that the wall outlet is near the machine and freely accessible, so
that, in the event of an emergency, it can be easily unplugged.
• Only connect the machine to the power source described under Power
Supply in this manual.
• Place the printer on a flat, horizontal surface.
• Do not damage, break or make any modifications to the power cord. Do
not place heavy objects on it, pull it hard or bend it more than necessary.
These actions could damage the cord. A frayed or damaged cord might
cause an electrical and fire hazard.
• Ventilate the room where you are using the printer.
• Do not place the printer where the ventilation hole of the printer is
obstructed. Keep a gap of approximately 100 mm (4 inches) between the
ventilation hole and the wall.
• Be careful not to trip on the legs of the optional stabilizer.
